Rooms of the Home

Soften an old masking tape roll to get it working for you again

Stop the busy work of climbing up and down a ladder

You know a pressure washer is great at cleaning the driveway, but did you know it can also be used...

These brilliant ideas may just inspire a renaissance of rotary tool use in your shop and beyond. Honestly, there isn’t...

Save yourself from buying a new vise with this tip.

Turn your compact-pickup bed into a plywood-carrying machine!

Check out this clever workshop tip!

Our best tips for getting your project done right.

Mount a removable metal ruler on the front edge of your workbench!

Remove rust the easy way

Just when you thought you’d seen every possible use for your portable workbench (the Workmate bench is shown here), here’s...

Build some clever plywood clamp extenders to use when bar clamps are too short to do the job. It beats...

Here's a tip for making lithium tool batteries last twice as long. Most kits come with two batteries. Take one...

A jointer is the best tool for flattening twisted, warped boards. But what if you don't have a jointer or...

Don’t have a power sander to sand curvy rough-sawn edges? You do if you own a 3/8-in. drill. Taper the end...

Save a “used”sanding-belt to make specialized sanding tools. All you need is the belt, a pair of scissors and a little...

Years ago, my son asked for help on an arithmetic story problem: “A 16-ft. long board is sawn into four...

Build your dream shed with easy access, storage galore and a private porch for lounging. Here's how to do it:

Transform scrap pieces of PVC pipe into storage sites for dowels and fasteners, courtesy of “tipfull” reader Al Miller. 

Build this mobile tool chest and take all your tools to the job in just one trip!

Here’s an outfeed roller that you can adjust in seconds to support boards coming off stationary power tools of every...

If you’ve ever cut an octagonal piece for a project, you probably “snuck up on it.” You drew the shape,...

If your miter saw isn’t cutting square, the problem is easy to fix. Unplug the saw, loosen the fence bolts,...

Subway tiles are a great way to give a bathroom a brand new look. Here's our step-by-step guide to...

We finally got the hang of preserving partially used caulk tubes from resourceful reader Stephen Hoke.

Here’s a method that’ll give you great results and keep the lid aligned perfectly as you cut each side.

Bending sheet metal and flashing into crisp angles is easy with this two-board bending tool. To build one, you need...

This jig holds your belt sander upside down for sanding of handheld project parts. Each sander has a different shape,...

This simple miter saw table has some great advantages and takes less than an hour to make.