How To Build a Table Saw Crosscut Sled

Updated: May 31, 2023

Make crosscuts on the table saw more accurately, repeatably and safely with a crosscut sled.

Next Project

A half day




$100 - $200


A crosscut sled adds functionality to any table saw and makes delicate cuts safer. This simple design is easy to build and will serve you for years to come.

Tools Required

  • Dado blade
  • Drill driver
  • Table saw
  • Try square

Materials Required

  • 3/4-in. Baltic Birch Plywood
  • 3/4-in. MDF
  • 36-in. T-track
  • 18-in. T-track
  • Thick CA Glue

Fh22apr 617 52 022Family Handyman

Figure A: Crosscut Sled

Overall dimensions: 36-in. W x 24-in. D x 5-1/4-in. H.

Table Saw Sled Tech ArtFamily Handyman

Cutting List

A 1 36″ x 24″ Sled base
B 2 36″ x 3″ x 1-1/2″ Fence
C 2 36″ x 3″ x 1-1/2″ Bridge
D 2 8″ x 1-1/2″ x 1-1/2″ Bridge cap

Project step-by-step (6)

Step 1

Install T-Tracks

Cut 3/4-in. dadoes in the medium density fiberboard (MDF) base 13 inches from both edges. Secure the T-tracks in the channels with 5/16-in. screws.

Table Saw Crosscut Sled Fh22apr 617 52 002Family Handyman

Step 2

Attach Miter Sliders to the Sled

Miter sliders are come in a range of styles, even homemade strips of solid wood cut to fit the miter slot. I used solid steel miter sliders made by Incra ($28 each). They won’t bend, and a tab on their leading edge keeps the sled from tipping out of the miter slots.

Table Saw Crosscut Sled Fh22apr 617 52 005Family Handyman

Step 3

Glue the Bridge to the Sled Base

Use thick CA glue¬†with accelerator to attach the bridge to the sled base. It doesn’t have to be perfectly straight or square; it’s there simply to keep the two halves of the sled together.

Table Saw Crosscut Sled Fh22apr 617 52 009Family Handyman

Step 4

Make the Kerf

With the blade completely elevated, run the sled through the saw until the blade is two inches away from the back edge.

Table Saw Crosscut Sled Fh22apr 617 52 010Family Handyman

Step 5

Align the Fence to the Blade

With the sled still on the saw, place the try square against the blade to align the fence to the saw, then glue the fence to the base. I used slow CA glue to give me time to make minor adjustments. When the glue is dry, secure the bridge and fence with countersunk 1-1/4-in. screws driven from the bottom.

Table Saw Crosscut Sled Fh22apr 617 52 014Family Handyman

Step 6

Attach the T-Track to the Fence

Cut the T-track to length and align it to the face of the fence. Attach the track with one-inch No. 6 wood screws.

Table Saw Crosscut Sled Fh22apr 617 52 015Family Handyman