Learn MIG Welding Tips From a Pro

Updated: Sep. 06, 2023

Learning to weld opens up new worlds. Gerrilyn Kujawa, a welder based in Minnesota, talks about getting started and the steps for making great welds.

Meet the Expert

Fh22jau 619 10 018 Courtesy Gerrilyn KujawaCourtesy Gerrilyn Kujawa

Welding is a unique skill shared by artists, manufacturing pros and high-tech robots. Gerrilyn Kujawa (@missmetal917) is proud to have a hand in it. Meet Brenda Hay, a professional welder. She shares her experience of being a woman in a male-dominated trade.

MIG Welding Equipment

Fh22jau 619 Bpt Ta01 Mig Welding EquipmentFamily Handyman

Metal inert gas (MIG) welding is the best choice for someone getting started in welding, Kujawa says. A MIG welder uses a gas-shielded filler wire fed from a spool through the gun. This creates a molten puddle when the wire contacts the workpiece. The shielding gas is usually bottled, but MIG welders can also run flux core wire. The flux inside the wire creates the protective gas shield, so you don’t need bottled gas.

Choosing a welder

  • Kujawa says the $200 MIG welders at home centers are fine for occasional light use, but you’ll need a better one to tackle thicker material or larger projects.
  • If you’re want serious about welding, plan to spend $400 to $600 for a good machine that will last.

Power considerations

  • To weld thicker material, you need a machine with a higher amp output. A 120-volt welder, powered by a conventional outlet, can weld metal up to 5/16-in. thick.
  • You’ll need at least a 20-amp (preferably a 30-amp) circuit. If you think you’ll be working with material thicker than 1/4-in., get a 240-volt machine and a 50-amp circuit to match.

Secondhand savings

  • Kujawa also suggests beginners look into used equipment, which isn’t as costly.
  • Pawn shops and Craigslist are great places to look. When purchasing a used machine, always test it.
  • Look inside to see if there are any obviously burnt wires, and make sure the buttons, knobs and display function properly.

Wire feed MIG welder

  • The wire spool is inside the machine or in a separate wire feed box. This feeds the wire through the gun when the trigger is pressed.

Bottled gas

  • For a MIG setup, you’ll need a bottle of gas, typically CO2 or a CO2/argon mix. Straight CO2 is the cheapest option. Adding in argon creates a better-looking weld. A filled tank costs $80 to $160 depending on the size and the gas mixture.

Ground clamp

  • The ground clamp completes the electrical circuit to create the arc. It’s important to clamp it to clean metal to get the best results.

Welding gun

  • Pressing the trigger activates the shielding gas, feeds the filler wire and applies electricity, creating the arc.

Build Your Skills

Every welder is different, but these tips from Kujawa will help you get started.

Practice with a caulking gun

Fh22jau 619 10 024 Learn Mig Welding Tips From A ProFamily Handyman

  • Kujawa learned this trick from a fellow welder — use a caulking gun and cardboard to practice welding movements. It’s safe and not intimidating. Move the tip back and forth consistently to lay down the bead with evenly spaced puddles.

Weld a 90-degree joint

Fh22jau 619 10 029 Learn Mig Welding Tips From A ProFamily Handyman

  • Tack the joint using a magnetic jig. Start your bead by holding the gun at a 45-degree angle to the parts. For the push technique, tilt the gun 10- to 15-degrees in the direction of the weld. Be sure to remove your magnet before welding the entire joint — the heat will destroy it.

Prep your material

Fh22jau 619 10 026 Learn Mig Welding Tips From A ProFamily Handyman

  • A weld is only as good as the surface prep. Kujawa uses an angle grinder to clean the surface area of any oxidation or contaminants. Joints must have a tight fit to ensure the weld is deposited evenly between both material surfaces.

Weld some straight beads

Fh22jau 619 10 025 Learn Mig Welding Tips From A ProFamily Handyman

  • Run some beads on a flat piece of scrap metal to practice your welding rate. Hold the tip at various angles and play with speed. This helps you form puddles easily and allows you to reach proper depth.

Be patient

  • Expect to make mistakes — that’s how we learn. Most important, have fun and enjoy it! You’ll find your way with time and practice.

The 5 Basic Welding Parameters

Also known by the easy-to-remember acronym CLAMS:


Referring to the amperage, this generally dictates the size and penetration of the weld.

Length of arc or “stick-out”

The distance the arc or electrode is from the workpiece.


The orientation of the gun in relation to the workpiece. This should typically be 10- to 15-degrees toward the direction of the weld.


The way you move your gun affects the physical qualities and look of the weld. For a “weave,” sweep the puddle back and forth, resulting in a weld resembling a braid.


Move too slowly and the bead will pile up on itself and look lumpy. If you go too fast, the shielding gas won’t have a chance to protect the weld, making it prone to failure.

Weld Safely!

Fh22jau 619 10 034 Weld SafeFamily Handyman

Welding can be dangerous work, and Kujawa takes every safety precaution available.

Safety glasses

Eye protection is a must for all power tool use. It’s especially critical for welding, because hot metal bits are likely to go airborne.

Hearing protection

Earplugs or earmuffs — the choice is yours. Many welders choose earplugs because they don’t interfere with welding helmets.

Welding jacket

This does more than make you look cool. Made from thick leather, these jackets (costing $40 to $130) prevent sparks and molten metal from burning your clothes or skin.

Auto-darkening helmet

These helmets ($40 to $100) let you see normally through the face shield until the gun sparks. As soon as the shield detects a spark, it darkens to protect your eyes.

Welding gloves

Thick leather gloves ($20 to $40) with a long cuff protect your hands and forearms from sparks and molten metal.

Full-length pants

Wear durable pants such as denim, or use welding chaps.

Work boots

Steel- or composite-toe work boots are a smart choice.

Apron (not shown)

An apron ($20 to $50) protects your clothes during other tasks, such as grinding or cutting.

Kujawa’s Everyday Tools

Not a day goes by that she doesn’t use one of these tools.
Fh22jau 619 10 003 011 012 015 Gettyimages 910714308 Learn Mig Welding Tips From A ProFamily Handyman, Getty Images

Framing jig

A framing jig is indispensable for holding parts at a 90-degree angle for tack welding.

Bead gauge

Helps you determine the size of your bead. This is the perfect quick-reference tool.

Combination square

This tool lets you mark square and angled lines on steel.

Metal brush

These are the go-to tools to clean parts before and after welding.

Fh22jau 619 10 013 001 004 006 007 014 Gettyimages 910714308 Learn Mig Welding Tips From A ProFamily Handyman, Getty Images

Welding and C-clamps

Welders use all kinds of clamps to hold materials in place for tack welding. You can’t have too many.

Welding magnets

Welding magnets ($10 to $50) hold parts together at precise angles while they’re being tack-welded.

Angle grinder

You’ll use an angle grinder ($30 to $100) to clean surfaces, shape parts before welding, and grind and refine the bead after welding.

Deburring tool

This removes the wire edge left on a piece of steel after it’s been cut.


Helpful for close inspections or to make it easier to see things when your hood is down.

Fh22jau 619 10 014 005 008 009 013 016 Gettyimages 910714308 Learn Mig Welding Tips From A ProFamily Handyman, Getty Images

Marking tool

Pencil lines don’t show up on steel. Kujawa uses chalk instead.

Mig welding pliers

These needle-nose pliers are used to install new nozzles, clean splatter and cut feed wire. Here’s everything you need to know about MIG welding.

Tip cleaner

An essential tool for MIG and TIG welders to clean the tips of a welding torch.

Brush tool

Where a grinder is too much, this brush tool helps clean the weld.

Cold chisel

Removes slag in tight places where a hammer can’t quite reach.

Adjustable pliers

Good for so many things. Every welder should have a pair.