16 Tips to Get the Best Plywood for Your Buck

Check out our best plywood money-saving tips to help you build better cabinets and furniture.

1 / 17
Plywood
Reimphoto/Getty Images

Best Plywood Options

Building furniture and cabinets is an investment of both time and money. So when you’re buying plywood for these projects, shop wisely. Your choices will have a huge impact on the building process and the results. We’ll help you decide exactly what you need and help you avoid common plywood pitfalls.

Plus, if you’ve been neglecting your garage, it’s time to pay attention and give that hard-working space the makeover it deserves.

2 / 17
Plywood on a cart in a home improvement hardware store
Juanmonino/Getty Images

Check for Flatness

Don’t expect perfection—you probably won’t find it. Just try to find the best of the pile. Sight down all the edges just like you’d do if you were buying 2×4 studs. Sometimes, sheets are warped in multiple directions, resembling a potato chip. Leave these for some unlucky, less informed buyer. If you’re buying 1/4-in. plywood, don’t worry about flat and straight; it won’t be either. But you’ll likely fasten it to structural parts, which will keep it flat.

3 / 17
inspect plywood edges void
Family Handyman

Inspect the Edges

Look closely at the core veneers on the edge of the sheet. They should be straight and of uniform thickness and have few, if any, voids. If you see a lot of voids and overlapping core veneers along the edge, there will be more throughout the sheet that won’t be visible until you cut it. Overlapping veneers cause undulations that aren’t visible until after you’ve applied a finish.

4 / 17
stack of plywood
Family Handyman

Bring a Friend

Plywood in 4 x 8-ft. sheets is heavy and unwieldy. Unstacking, inspecting, restacking, loading and unloading are much easier with an extra set of hands.

5 / 17
high quality plywood
Family Handyman

Watch for Buried Treasure

The most beautifully figured face veneers will be at the lumberyard. But when I’m at the home center, I like to check out the back faces of the plywood or even plywood that’s meant for underlayment. Because most people look for consistency of color and grain, there are some striking veneers that get written off as ugly. Quite often, something catches my eye that could be a really cool design element.

6 / 17
special order plywood from home depot
Family Handyman

Special Order Plywood From the Home Center

Some home centers will special-order many different species, core options and veneer cuts. But beware: You won’t be able to look at the actual sheets before buying, and you probably won’t be able to return or reject them unless they’re damaged or otherwise unusable. If it’s just that you don’t like the grain pattern, you’re probably stuck with it.

7 / 17
birch beech paperbark maple
LeniKovaleva, Michael Richardson, Sim2018/Shutterstock

Using Stain? Beware of Birch.

Any tree species accepts a clear finish such as polyurethane just fine. But if you’re planning to stain your piece, beware of birch, pine and maple. These species take stain very unevenly and can end up looking blotchy. If you’re set on one of these species, use prestain conditioner, which helps them take stain much more evenly. Even better, look at samples of different species with a clear finish and see if there’s one that has the color you like without stain.

8 / 17
plywood grades
Family Handyman

Know the Grading System

Hardwood veneer plywood has a front and a back face and is graded by the quality of each face. The front face is graded using a letter (A–D), with A being the best. The back face is graded using a number (1–4), with 1 being the best.

9 / 17
plywood corner
Family Handyman

Shop the Home Center for Convenience and Savings

Baltic birch is a premium plywood found at lumberyards. It’s strong with good screw-holding capability, making it a good, affordable alternative. It’s perfect for less visible cabinet parts, drawers and shelving. As for other plywood, home centers have a more limited selection, carrying mostly veneer core (maybe MDF core), grade B2 and lower. Face veneer cuts are typically rotary cut or plain sliced, and in-stock species will usually be red oak, birch and maple. But the home center is a good option to save a little money.

10 / 17
PortaMate-plywood-tote
Family Handyman

Don’t Have Plywood Delivered

If you have a way to haul sheets of plywood yourself, do it. The person pulling sheets for delivery isn’t going to handselect the nicest sheets for you. If delivery is your only option, inspect the sheets before the delivery truck leaves and reject any that are damaged or unusable. You may not have the option of rejecting a sheet because you don’t like the grain pattern.

11 / 17
mdf plywood
Family Handyman

Using Paint? Choose MDF or Birch

For projects I’m going to paint, I like MDF (medium-density fiberboard) or birch. B-grade birch or lower is fine. Sometimes, you’ll even see plywood classified as “paint grade.” Birch is close grained with a smooth texture that doesn’t show through paint. With an open-grained species like oak, the grain is visible under paint. MDF, of course, has no grain pattern, making it a good choice for painted projects. But for structural parts, I like birch veneer.

12 / 17
Sand plywood at your own risk veener adhesive showing through
Family Handyman

Sand at Your Own Risk

All plywood needs at least light sanding before finishing. Sometimes, the face veneer on home center plywood is so thin that the pink veneer adhesive shows through. On several occasions, I’ve had birch veneer turn translucent after light sanding with 220-grit paper. If you suspect that the veneer is ultra thin, don’t use a power sander. Just sand by hand.

13 / 17
Rough Sawn lumber
Family Handyman

Shop Lumberyards for Quality and Selection

For a large selection of the best-quality hardwood veneer plywood, visit a lumberyard. A lumberyard that caters to cabinetmakers will give you enough options to make you dizzy. There are a few things you should know before heading to the lumber yard.

14 / 17
bow out of plywood
Family Handyman

Can You Get the Bow Out?

Admit it: You’ve tried flattening sheets of plywood. I have too. I’ve tried weights, clamps, wetting down the concave side, sun drying the convex side and gluing opposing bowed sheets together. Nothing seems to work with any reliability. If the core veneers weren’t in a perfect state of equilibrium and all in harmony when they were bonded together, the sheet has little chance of flattening out. The only recourse is to save the flattest sheets for the largest parts and use the worst sheets in smaller components, minimizing any curvature.

15 / 17
plywood
Family Handyman

Don’t Just Grab the Top Sheet

Be picky and dig through the pile for the best sheets. Spending extra time to find the flattest undamaged sheets with appealing grain pattern is well worth the effort. But be kind and restack! And take heart; the bottom sheet is usually a bad choice anyway because it’s most prone to forklift damage.

16 / 17
damaged plywood
Family Handyman

Watch Out for Damage

You can often cut around minor damage in an otherwise good sheet (if you can, you might even be able to get a discount). But sanding out deep dents (above) isn’t an option. You may not be able to sand out stains either. The purple stains shown result from a reaction between oak tannin and steel.

17 / 17
Family Handyman

Best Plywood for Cabinets: Look at the Face Veneers

If only one side of your project will be visible, like a closed cabinet, don’t worry about the back face. If you’re building an open bookcase where both faces are visible, make sure you like the look of both faces.

Brad Holden
Brad Holden, an associate editor at The Family Handyman, has been building cabinets and furniture for 30 years. In that time, he has absorbed so many slivers and ingested so much sawdust that he's practically made of wood.