Snag the product shoppers call "a miracle in a bottle" at a limited-time savings of 33%!
Our editors and experts handpick every product we feature. We may earn a commission from your purchases.Learn more.
Snag the product shoppers call "a miracle in a bottle" at a limited-time savings of 33%!
Our editors and experts handpick every product we feature. We may earn a commission from your purchases.Learn more.
Fire up your woodworking power tools and clamps—one of the best wood conditioners on the market is on sale. Whether you’re looking to wax floors, remove water stains or find a gift for a woodworker, this Sales Editor has you covered. Say hello to Howard Feed-N-Wax, backed by incredible before and after photos and over 34,000 positive Amazon reviews.
On This Page
Traditionally, wood conditioner is a blend of oils and waxes that applies to wood surfaces to provide a hydrating finish. It offers a myriad of benefits, including preventing cracks and extending the life of wood-based furniture.
Howard Feed-N-Wax is a one-step wood conditioner, hydrator, polisher and protector. Conditioner oils “feed” wood, offering hydration and color protection that bolsters the lifespan of traditional polyurethane wood finishes. It enhances the look of hardwoods across the spectrum, including walnut, oak, cherry and maple.
It’s safe for antiques, thanks to the omission of often-seen fillers like silicon and linseed oil that can harm the wood over prolonged periods of use. An effective and safe blend of orange oil, carnauba and beeswax make up most of the formula.
The best part? Howard Feed-N-Wax doesn’t leave a chemical smell that lingers after use. Shoppers describe the orange scent of the wax as “pleasant” and “lovely.” Look forward to cleaning day—pick up a bottle and put your microfiber towels to work.
First, coat the wood in an even, set finish—we recommend wipe-on wood finishes for a quick project. While Howard Feed-N-Wax elevates finishes of any age, it’s not a finish in and of itself. If finished wood isn’t the look you’re going for, you can skip this step. For old finishes, consider using Howard Restor-A-Finish to enhance the appearance before waxing.
After finishing the surface, clean it with a quality wood cleaner like Howard Orange Oil paired with a microfiber cleaning cloth. This removes dust, debris and helps the Feed-N-Wax penetrate the wood. Wait for the product to dry after cleaning for the best results. After the cleaner dries, it’s time to wax!
Note that butcher block oil is the better choice for surfaces that touch food, like serving trays. Howard offers its own butcher block conditioner and oil.
Apply a thin layer of Howard Feed-N-Wax to a soft cloth and begin wiping in large swipes, following the grain. Apply generously enough to coat the wood, while still avoiding clumps of the product from building up on the surface. The smoother, the better.
Once you apply the product, let it set for at least 20 minutes before wiping off the excess with a clean cloth. For unfinished woods and older finishes, the wait time may be closer to eight hours. Repeat the process until you achieve your desired look and any time the wood requires a little extra TLC.
Howard Feed-N-Wax is a popular product available at retailers like Walmart and Ace Hardware. I recommend scooping it up on Amazon for a limited-time savings of 33%. At that price, it’s worth it to stock up on a few bottles—especially if you’re a woodworker, up-cycler or DIYer.