22 Inexpensive Ways to Theft-Proof Your Home
You don’t need to spend a fortune to keep burglars at bay. Here are some inexpensive (yet very effective!) DIY home security ideas.
How to Secure Windows with Simple Window Locks
The latches on most double hung windows are no match for a burglar with a pry bar. Pin locks are an easy solution. To install one, all you have to do is drill a hole. If you want to lock the window in a partially opened position, drill a second hole. You can find pin locks at home centers and online. They work well on sliding patio doors too. Plus: Check out these home security mistakes you may be making that are putting you at risk.
Put Motion Detector Lighting Anywhere
Home Security Tips
Given the right tools and enough time, a determined thief can steal almost anything!
Secure Sheds With Screws
Your locked shed seems secure, but a cagey thief can bypass the lock by using a screwdriver to remove hinges and other hardware with exposed screw heads. Foil would-be thieves by using Allen head, Torx head or hex-head cap screws instead of standard Phillips head screws. You can also order tamper-proof security screws that require special removal tools that an opportunistic thief is unlikely to have. You’ll also need to buy the special bit or tool. Type “security screws” or “tamperproof screws” into your search engine.
Two Ways to Secure Shed Door Hinges
Shed doors usually swing out, so the hinge pins are accessible from outside; all a thief has to do is pop out the pins and remove the door. To stop this, buy a security hinge with tamper-proof pins and a locking tab at a home center. Or, you can retrofit an existing hinge by removing the center screws on both sides, inserting a finish screw through one side and allowing it to protrude about 1/4 in. Drill out the receiving hole slightly so that when the door is closed, the finish screw head engages the other hinge. That way, even if the hinge pin is removed, the door can’t be taken off.
Add Inexpensive Door and Window Alarms
Attach the alarm to the door or window (with a screw or double-sided tape) alongside the magnetic contact strip (they don’t have to be touching, but within 1/2 in.). When the door or window opens, breaking magnetic contact, the alarm shrieks (these little units have a piercing alarm). The door alarm has a delay feature, giving you time to set the alarm and leave, then open the door and deactivate the unit when you come home, without setting it off. The window unit has an on/off switch. The alarms will work on any door or window, and the batteries last two to three years.
BIBENE WiFi Home Security Door Alarm System DIY Kit
This cost-effective home security alarm system kit features a built-in magnetic contact sensor and PIR (passive infrared) motion sensor to detect any forceful break-in, activating the alarm to scare off intruders. The app allows you to control the whole security system anywhere with your smartphone or tablet. You receive warning notifications of the exact location where the alarm was triggered, while you can also use the app for arming delay, and more. The kit comes with a PIR main panel, a wireless PIR motion detector, 5 door/window sensors, 2 remote controls, an AC adapter, a user manual and all backup battery and installation accessories. Hide valuables and personal items in plain sight with these 3 secret hiding spots almost everyone has in their home.
Photo: Courtesy of BIBENE
Install Door Reinforcement Hardware
Measure the entry door thickness and the spacing between the entry knob and the dead bolt cylinder. Then buy either a single or a double wrap-around door reinforcement plate kit and four 1-1/2-in.-long stainless steel wood screws. Then get a doorjamb reinforcement kit.
Remove the entry knob and dead bolt cylinder. Then remove the dead bolt and latch and toss the short screws. Install the wrap-around door reinforcement plate and reinstall the latch and dead bolt plates using the longer stainless steel screws. Next, can you guess what the absolute first thing you should do when you move into a new home is?
Defeat Bolt Cutters
Pick-Proof Your Dead Bolt
Reinforce Your Entry Door Strike Plate
To install, remove the old strike plate, then hold the new one in place and deeply score around it. Chisel out space for the new plate, then mount it by driving 3-in. screws through predrilled holes.
Secure Patio Doors
Andersen Corp.’s auxiliary foot lock fastens along the bottom of the door and has a bolt that fits into a grommet to hold the door secure. A similar lock, the Door Guardian, attaches at the top of the door. Both locks allow the door to open 3 in. without compromising security. Installation takes about 10 minutes. Screw the bracket containing the pin to the door, then drill holes and insert grommets in the track for the pin to slide into.
An Even Simpler Idea for Sliding Doors
Like a lot of folks, we needed something to secure our sliding patio door. But I wanted it to be a little more stylish than a 2×4 or an ugly metal bar. So I picked up an oak handrail and stained and sealed it. I finished it with an attractive drawer pull. It works great, it’s easy to handle and it gets tons of compliments from everyone who sees it. — Ryan Velthuis
Check out these tips to fix a sliding glass door should the time ever arrive.
Beef Up Your Wooden Garage Entry Door
Cut the plywood to fit over the door’s center section (make sure it covers the windows but doesn’t cover the door handle). Fasten it to the door with drywall screws.
Test-fit a bracket and 2×4 against the door. Measure how far the bracket is from the wall, then cut filler strips that distance and install them. Fasten the brackets in place by drilling 1/4-in. pilot holes and inserting 3/8 x 3-in. lag screws. Place the 2x4s in the brackets.
Add a Security Anchor
What do you do when you don’t have a place to lock your bike, canoe or construction materials while you’re away? Sometimes—unfortunately—call the police to report a theft. The Kryptonite Stronghold Anchor, once installed, provides a safe, permanent anchoring spot for your stuff.
This clever, tamper-resistant system involves drilling three holes and installing bolts to anchor the heavy-duty security hook to cement (bits included). A dome covers the hook and bolts. The anchor can also be installed in truck beds or secured to other surfaces using your fasteners. The instructions are clear, the design is clean and simple, and it comes with a lifetime warranty (well, you know, sorta).
Install a Small Safe
Install the wall safe or cylinder floor safe by bolting it to the floor (most safes have holes inside for just that purpose). Hide it in the corner of a closet or other inconspicuous area. Or mount the wall safe inside a wall and cover it with a picture. Or chip out a hole in your concrete slab and stick in the floor safe, then pour new concrete around it.
Keep Spare Keys in a Lock Box
Blink Home Security Camera Kit
This wireless security camera system is a three-camera package that requires AA batteries and a WiFi connection to operate. It can cover a lot of square footage of your home, with each device featuring built-in sensors that are triggered by motion. Upon detecting an intruder’s movement, the alarm goes off and an alert is sent to your smartphone, while a short video clip of the event is uploaded to Blink’s cloud storage. You can even integrate the security cameras with Amazon Alexa-enabled devices. Install a reliable security system in just one day. DIY home security systems will help to protect your home and your family.
Photo: Courtesy of Blink Home Security
Know Who’s There
Avoid uncertainty by installing a wide-angle door viewer. The one shown here from M.A.G. Engineering and Manufacturing Co. (magsecurity.com, No. 8720) offers a 160-degree view and is available on the company’s website. Install it just like a standard peephole—drill a hole from each side and screw it in.
Protect Your Mail
Don’t Keep the Clicker in Your Car
A thief who breaks into your car can grab the remote for easy access to your garage. This isn’t just a problem when your car is parked in the driveway; the registration card in your glove box gives a crook your address.
So get rid of the remote on your visor and buy a keychain remote. You can easily take it with you every time you leave the car. Home centers stock only a small selection of remotes, but you’ll find more online. Start your search by typing in the brand of your opener, followed by “remote.”
Lock Up the Overhead Door
Be Smart with Social Media
Social media is a fantastic tool, one that works great for staying in touch with friends and for sharing travel experiences and photos … after your trip is over.
Remember that social media is built to be public, which means that it’s a bit like talking to a crowd with a megaphone. Don’t share travel plans unless you’re comfortable with the entire social media community knowing about them. Because social media accounts default to a public setting, criminals can simply search for keywords like trip, travel, vacation, out of town and find descriptions of the dates and times that people will be leaving their homes.
To avoid this, simply wait until after your trip to share information about your trip! If you do feel the need to let people know you’ll be out of town ahead of time, take a few moments to ensure that your post is marked as private through that social media platform. By limiting its audience and it searchability, you can make sharing your schedule much more secure. Check out this article for more tips on how to use social media safely.
Disclosure: This post is brought to you by The Family Handyman editors, who aim to highlight products and services you might find interesting. If you buy them, we get a small share of the revenue from the sale from our commerce partners. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We welcome your feedback. Have something you think we should know about? Contact us, here.