17 Ideas for Storing All Kinds of Tools
Having lots of tools is fun, but finding ways to store them is not. Here are 17 ingenious ways to keep your ever-growing tool collection in order.
Bench-Top Tool Storage Tip
Here’s a smart way to keep a vise or small bench-top tool right at your fingertips without cluttering your workbench: Build this slide-in base and mount the vise or tool on it so the entire unit can slide back in upside down and out of the way. Countersink holes into the underside of the base so you can recess the mounting nuts and washers.
A Wrench Rack From the Clothes Closet
Are all your wrenches stuffed in a plastic bucket? Here’s a better idea. Screw a tie/belt rack (available at discount stores) to a bare spot on the wall over your workbench and hang the wrenches—SAE and metric—where you can swiftly nab and put them away in an orderly fashion.
Rubbery shelf liner works great in toolboxes, but there’s a cheaper alternative. Cut a nonslip rug mat to fit any size drawer and keep tools from sliding around. For the ultimate in tool storage drawers, check out this handy tabletop cabinet.
On-a-Roll Pegboard Doors
The trick is to insert 1/2-in. plywood spacers in the roller hardware as shown. You can use the floor bracket that comes with the slider hardware to maintain the same 2-in. clearance at the bottom of the cabinet. For door handles, simply drill a couple of 1-1/4-in. holes in the pegboard with a spade bit. Now pop in the pegs and hang up your tools.
Find another pegboard shop storage solution here.
Foam Ball Tool Storage
Behind the Door Storage: Tool-Apron Storage
Storage Pockets for Skinny Things
Double-Duty Shelf Brackets
Cutlery Tray Tool Chest
Be honest! Somewhere you have a tool drawer bursting with a combination of screwdrivers, nail sets, tape rolls, utility knives, scissors, scrapers, measuring tapes, files and knives. And often you have to dump everything out to find one tool.
One solution: Fit a large cutlery tray (about $3 at Walmart or Target) in the drawer to organize the tools so you can see and grab the one you want in a second. The tray is easy to lift out and carry to a job, and if you use a metal mesh tray, dust can’t build up between the tools.
Electrical Box Toolholders
Junction boxes can hold a lot more than switches and wiring. Nail or screw them wherever you need handy holders for small stuff. They come in different sizes and shapes and cost 50? to $2 each.
Corner-on Pegboard Hooks
Ever had a plane, level or square get dinged up after falling off the pegboard? Never again. Bend an 8-in.-long pegboard holder into a corner shape by holding it in a vise and pounding it with a hammer to make the series of right angles. Make one corner to hold the left side of the tool and another to hold the right. Now just hold the tool up to the pegboard and insert the corner peg so it clasps the tool’s corner.
Tidier Tool Trays
A piece of short-pile carpet in the bottom of each tray in your tool chest will keep tools from shifting and knocking about. So the next time you open the tray, the tools will still be laid out nice and neat the way you left them. Another benefit: less noise.
Circular Saw Luggage
An old bowling ball bag makes a great portable home for your circular saw. The saw easily slides in and out of the zippered opening, so there’s no more coaxing it into that molded plastic case and fumbling with those stubborn plastic snaps. And there’s plenty of room for spare blades, a rip guide and the blade-changing wrench. So, if you’re spending more time building frames than bowling them, nab a secondhand bag for a couple of bucks at a yard sale or secondhand store.
Cordless Drill Hangout
Here’s a high and mighty way to prevent cordless drills from toppling off your workbench. Screw large vinyl-covered hooks (available for about $2 at hardware stores and home centers) to a convenient spot on a wall or exposed stud and hang up those drills for safekeeping and easy access.