I have a typical 6-ft. folding table that I use to layout certain projects. But the height of the table is meant for someone sitting in a chair. Constantly bending over when using the table was starting to hurt my back, so I came up with a solution. I used a couple of 2-ft. lengths of 1-1/4-in. PVC pipe found at my local home center, and cut four 11-in. stilts for my table.
I slipped the pipes onto the legs and it raised the table about 6 in., bringing my work surface to a more comfortable height! The bend in the table legs at about 5 in. from the ground holds the pipes securely in place, so my table is still as sturdy as ever. The stilts can be removed if I ever need to lower the height of the table to use it while sitting in a chair. — Gary Inlow