Airtight Caulk Tube Seal
Done with the caulking job but the tube’s only one-third empty? Dip the caulk tube nozzle into a can of Plasti Dip rubber coating ($6 at a home center). You’ll create an airtight seal that’s easy to peel off when you need to caulk a shower. Thanks to Kevin Lind for this tight tip.
Easy-to-Find Drill-Driver Bits
You know you have the right-size driver head, spade bit, socket driver, bit extension or Vix bit—but where?
Now you can work more e-fish-ently with this tip from Fred Dorman. Pack a transparent plastic tackle box ($3 at any sporting goods store) with all the driver gear you own. Adjustable partitions let you create the perfect-size slots to fit the bit or driver size. A tackle box is also great for storing hardware and all those router bits that would otherwise hide somewhere in the back of a drawer.
Here’s a gripping, portable organizer for all those wrenches and sockets. To make your own, cut a 5-in. handle slot in a piece of 14-in. x 11-1/2-in. x 3/4- in. plywood and screw it to the middle of a piece of 14-in. x 8-in. x 3/4-in. plywood. Band the bottom with strips of 1-1/4-in. x 1/2-in. plywood to reinforce the tote and keep the sockets and accessories onboard. For wrench storage, fasten 13-in.-long magnetic tool bars ($10 each at leevalley.com; No. 99K45.01) halfway up on both sides of the handle board. Tack or glue divider strips to the floor as needed for better socket sectoring. That’s it—load and tote! Thanks to reader Stephen Balazs for this great idea.
Don’t want tote them around, use a tie hanger to store wrenches.