Easy Glue Bottle Cap
A medium-duty hollow wall anchor is the best glue bottle cap we’ve found. The narrow rectangular tip seals the opening of every glue bottle we tried. And the hollow wall anchor is much larger than the cap—so it’s that much harder to lose. Or try swapping out the cap with one that closes.
Circular Saw Cutting Guide
Who needs a table saw anyway? With this cutting guide, you can make accurate 90- and 45-degree cuts with your circular saw.
Cut the guide to the size you need, checking its angles with a framing square. Screw a 4-in. cleat board on one side, positioned so that the guide will extend beyond both edges of the board you’re cutting. You’ll get a straighter cut because the saw will be supported as it begins and ﬁnishes the cut.
Drum-Sander Dust Collector
Capture the dust that flies off a sanding drum before it ﬁlls your shop and lungs! All you need is your shop vacuum, a 3 x 2-in. PVC reducing coupling ($1.35) and a pot magnet ($4). Bolt the magnet to the coupling and put the coupling over the end of the vacuum hose. A 2-1/4 in. dia. shop vacuum hose ﬁts snugly inside the coupling’s smaller end without clamps or glue. Then just set the hose on the drill press’s metal table and let the shop vacuum eat your dust. You can use this setup on any power tool with a metal table.
Find more dust-collection tips here.