Stretchy Pipe Clamps
Moaning again that your pipe clamps aren’t long enough to assemble your new “monsterpiece?” Pipe down and quit whining! A few extra 2- and 4-ft. pipe segments plus a handful of pipe couplings are all you need for the extra-long or extra-wide job. Screw couplings and extra pipes to those too short pipes to create the needed lengths. If the clamps are under the wood, add spacers slightly higher than the couplings perpendicular to the pipes. When you’re finished, unscrew and store the extra pipes with couplings and you’ll be ready for the next jumbo project that comes down the pipeline. A big thanks to Jeff Poirier for tipping us off to this great idea.
To keep your hardware neat and accessible, thread nuts, washers, sockets and other items on short pieces of 12- or 14- gauge electrical wire, then hang them on a toolbox handle or a pegboard hook. Twist the ends of the wire into hook shapes that interlock for easy closing and opening. Many thanks to reader Roger Swanson for tying up this neat tip.
Here’s how to cut an inch off a nicely finished door or workpiece when you don’t want to risk dinging up the surface with that scratched-up shoe on your circular saw. Apply painter’s masking tape to the shoe and you’ll saw scratch-free every time. Thanks to reader Chris Siemasko for this tip.