Table Saw Worktable

Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug fit.

Is your shop too small? (Duh, whose isn’t?) Take a tip from reader Dan Burbank: Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug, non-slide fit on the metal table. Two cautions: Unplug the saw before using it this way, and make sure the saw blade is cranked below the table’s surface.

Check out our favorite table saw tips and techniques.

table saw worktable

Popular Videos