If you do a lot of spray painting and finishing but don’t have room for a permanent finishing bench, give this turntable a spin. It’s surprisingly sturdy, and because it rotates, you can get to all sides of your project while standing in one spot. It’s lightweight, so it can easily be taken outside. When you’re done, just unscrew the pipes from the flanges and store all the parts out of the way in the corner of your shop. The pipe parts are available at home centers, hardware stores and plumbing stores. Don’t try to use pipes with diameters other than 1 in. and 1-1/4 in. These are the only pipe diameters that telescope together well. The plywood top is 36 in. in diameter and the base is 24 in. in diameter. The total cost of the turntable, including the plywood, is about $40. Our thanks to Michael Dresdner for this tip.