Reader Project: Simple DIY Miter Saw Stand

“I followed the plans to build the miter saw station.  It took me a few days, but I got it done. I made it all out of 1’x4’s, except the wings. I added the top guides on both wings with a tape measure on the top. On the back, I attached a permanent 50-foot electrial cord.”

The Family Handyman reader, Richard Rowe, built the Convertible Miter Saw Station that was featured in the November 2015 issue.

“I followed the plans to build the miter saw station. It took me a few days, but I got it done. I made it all out of 1x4s, except the wings. Than I added the top guides on both wings with a tape measure on the top. On the back, I attached a permanent 50-ft. electrical cord. When I turn on the power to the table the vacuum comes on. To make the station mobile, I plan on adding 4-in. casters that will also lock the stand in place.” — Richard

Popular Videos