Capture the dust that ﬂies off a sanding drum before it ﬁlls your shop and lungs! All you need is your shop vacuum, a 3 x 2-in. PVC reducing coupling and a pot magnet. Bolt the magnet to the coupling and put the coupling over the end of the vacuum hose. A 2-1/4 in. dia. shop vacuum hose ﬁts snugly inside the coupling’s smaller end without clamps or glue. Then just set the hose on the drill press’s metal table and let the shop vacuum eat your dust. You can use this setup on any power tool with a metal table.
Find more dust-collection tips here.