How to Make a Disc Sander Extension Table

Disk sander tables are far too small to support long work while sanding. So build an extension.

Disc Sander Extension Table

Disc sander tables are far too small to support long work while sanding. So build an extension.

Use any 3/4-in. sheet good, as long as it’s flat. Cut out a notch to accommodate the sanding disk, and make sure the ends are long enough for you to clamp it in place. Covering it with plastic laminate makes the work slide over the extension table effortlessly.

Plus, check out this safety gear every DIYer should own.

extension table