Quick Covers for Handscrews
Handscrews are the pros’ choice for clamping face-glued boards and laminates. The only drawback is that the handscrew jaws can load up with glue, and if you’re not careful, they could become a permanent part of the project! Here’s the solution, courtesy of reader Merle Kilburg:
1. Wrap duct tape or clear packaging tape around the handscrew jaws to keep glue from penetrating and adhering to the clamps.
2. Remove the clamps once the glue is set but still pliable. Use a moist rag to clean the glue off the taped handscrews, or strip off the tape and apply new tape before your next messy job.