Quick Edge Glue Cleanup
To avoid the hassle of cleaning and scraping dried glue when edge-gluing boards together, press masking tape along both edges of the boards before putting on the glue. This way, the glue will ooze out onto the tape instead of the wood when you tighten the clamps.
Lost Cap? Here’s a Quick Solution
No matter how careful you are with the little plastic top for a glue bottle, it always vanishes, sometimes in a matter of seconds. Next time, try a rubber eraser. This rubber eraser fit the bottle as if it were made for it. Thanks to woodworker Dave Munkittrick for this topical tip.
Some brilliant uses for barbecue skewers:
- Puncture that pesky seal in caulk tubes.
- Apply glue in dowel holes or biscuit slots.
- Scrape gunk out of crevices on furniture you’re refinishing.
- Plug stripped-out screw holes on antique furniture so the screws will grip tightly.