Remove Hardened Glue With a Paint Scraper
We've all been there. You glue up your project and then quit for the night. The next day you discover the rock-hard glue and realize that you forgot to scrape off the glue squeeze-out. Don't despair. A sharp paint scraper makes fast work of hardened glue. Either a sharp steel scraper or, better yet, a carbide paint scraper will pop off all those glue beads in a heartbeat.
Tack, Then Clamp
Wood glue makes boards slippery, so it can be hard to keep them lined up correctly while you apply clamps. An easy solution is to hold the parts in alignment with a few strategically placed brads before you apply the clamps. For leg glue-ups like we show here, cut your parts extra long and place the brads where they'll get cut off during the finishing process. Otherwise, just place brads where the filled holes won't be too visible.
The Right Amount of Glue
With a little experience, you'll develop a feel for how much glue is just enough. Too little glue creates a “starved joint,” which will be weak. Too much glue makes a mess and wastes glue. With practice, you'll know just how much to apply. You should see a continuous line of small glue beads. When this perfect glue joint sets a little, you'll find it easy to scrape off the jelled excess, and you'll have very little cleanup to do.