Remove Excess Glue With an Abrasive Pad
It can be difficult to remove excess glue with a rag. And if you don't get it all off the surface when it's wet, the dried glue can show up as light spots when you finish your project. But a synthetic abrasive pad, dampened with water, works perfectly to remove the glue. Dip the pad in a container of water. Unlike a rag, which is hard to rinse glue from, the pad has a loose synthetic weave that releases glue easily. After rinsing out the pad, shake it to remove most of the water. Then use it to scrub off excess glue. When you're done, dry the surface with a clean rag. Green abrasive pads are found with the cleaning supplies at grocery stores, hardware stores and home centers.
Remove Hardened Glue With a Paint Scraper
We've all been there. You glue up your project and then quit for the night. The next day you discover the rock-hard glue and realize that you forgot to scrape off the glue squeeze-out. Don't despair. A sharp paint scraper makes fast work of hardened glue. Either a sharp steel scraper or, better yet, a carbide paint scraper will pop off all those glue beads in a heartbeat.
Tack, Then Clamp
Wood glue makes boards slippery, so it can be hard to keep them lined up correctly while you apply clamps. An easy solution is to hold the parts in alignment with a few strategically placed brads before you apply the clamps. For leg glue-ups like we show here, cut your parts extra long and place the brads where they'll get cut off during the finishing process. Otherwise, just place brads where the filled holes won't be too visible.