10 Tips for Whittling Wood
Whittling wood has been a hobby since there were sticks lying around and sharp things to shape them. Whittling has been passed down from one generation to another for millennia. And, the great thing about whittling wood is that there is very minimal investment and little skill required to start.
The easiest way to start whittling wood is to find a stick or piece of wood and start slicing away. If you want to start with pre-cut wood, buy blocks and stick to softwoods. The most common whittling wood is basswood. It is soft and you have minimal grain to deal with. Other good wood types include pine and cedar. Wood blocks can be helpful in sanding your work as well.
A Simple Pocket Knife
The simplest knife to use for whittling wood is a pocket knife. It’s easy to carry and has other functions, as well. Plus, unlike specialty knives, pocket knives can be found almost anywhere. Pocket knives with several different blades can give you variety in your cuts. Check out some of our editors’ favorite pocket tools.
A Serious Carving Knife
A serious, yet inexpensive, carving knife can be purchased online. The one in the image above, is handmade by a craftsman using a part of a straight razor and carved handle. Knives like this have a larger handle for more control and often stay sharper longer. They also are, generally, easier to sharpen and are better at detailed work, like feathers and beaks. Just be careful because these are fixed blades. You may want to consider putting an old wine cork on the end as protection. Of course wood isn’t the only thing to carve. How about carving pumpkins with power tools?!
As with any hobby, whittling wood can come with an array of accouterments. This knife above is a special knife that is useful when whittling spoons. The curved blade helps cut the bowl of spoons and ladles. It is harder to sharpen then straight knives but makes short work of curved cuts.
If you want to try spoons and ladles, try fruit tree woods like apple or pear. This beautiful wood cutting board can be made from scraps!
A Dull Knife Will Cut Quicker
An old axiom when using any blade is a dull blade will cut quicker than a sharp one. The thought is counter-intuitive at first, but is related to the force needed to make the cut. The harder you have to push or pull to remove the excess wood the greater the force the blade may hit you with if it slips. When you notice the cut getting harder, stop and sharpen the blade. This simple, sure technique for how to sharpen a knife requires only two inexpensive tools.
Strop or Stone
So you’ve stopped to sharpen the blade while whittling wood. Great, but what are you using? This can certainly be personal preference, but there are two basic camps, strops or stones. Typically, those using a pocketknife use a stone, while those using a carving knife will use a leather strop, shown here. You can make your own strop buy gluing part of a belt to piece of wood. Draw the blade back and forth several times at a low angle (10 to 20 degrees). Here are 13 expert sharpening tips and tools to make the job easier—no more dull DIY and garden tools!
You may have been told to always cut away from yourself and yes, this is generally a good rule. However, when whittling wood, several cuts require you to cut toward yourself. The rough cut is a hard pushing cut that takes off large chunks. The thumb-push uses the secondary hand’s thumb to guide the blade as you cut. The paring cuts, like if you’re paring apples, is a pulling cut that cuts toward you and your own thumb. It can take a bit of practice to get these cuts right. Nigel, our crash-test dummy, would like to teach you how to prevent common injuries by using your power tools safely.
To Glove or Not
There are a number of gloves out there to protect you as you are whittling wood. One of my favorite is a cut-proof glove with a Kevlar palm. It’s pretty hard to hurt yourself while wearing one of these. It is also pretty hard to feel the wood and manipulate the knife. Old timers don’t wear any protection while whittling wood. However, you may feel more comfortable starting out with something protecting your digits. This is the safety gear every DIYer needs.
Aside from the obvious things, like sticks and worms…, other animals, like simple birds, are great starter projects. There are many kits for whittling wood out there that come with outlines and basic plans. Find one that intrigues you, just don’t start with one that requires a great of detail. You will build up your skill level as you practice. Try going layer by layer, roughing out the body and then redrawing the lines to make finer detail. Whittling wood isn’t the only woodworking hobby that you can start. Check out these 19 easy woodworking projects for beginners.
Where and when?
The nice thing about whittling wood is that it can be done anywhere. All you need is a knife and a stick. The idyllic vision of whittling wood has you sitting on the back porch while the sun goes down, chatting with a friend or a child. Also, many communities have groups of whittlers that meet, hang out and carve. Just remember that no matter where you whittle, always clean up after yourself. Ever wonder how to make a Pinewood Derby car? Check out our 7-step how-to plans and video.
Every product is independently selected by our editors. If you buy something through our links, we may earn an affiliate commission.