Photo: Courtesy of Tyler Ferguson
There were a lot of interesting architectural details on this house, but the entry was probably the most challenging. The ledger, ribbon and drop beam were all made from laminated layers of plywood, and the joists were all LVLs. We sheathed the roof with two layers of 3/8-in. sheets of plywood. The whole thing was held up with four 6×6 posts, which we boxed in for the stone guys. To complicate matters, the structure needed to be held several inches away from the wall so the stone could run behind it.
A woodshop milled the cove and the cantilevered fascia, and we trimmed the rest in cedar. All the flashing was copper as was the entire roof (installed by others). From start to finish, the entry took about 140 hours. I love projects like this, ones that require more than just a framing gun and a level. Luckily, I get to work on a bunch of them. — Tyler Ferguson