Reinforcing flat-pack furniture during assembly
Flat-pack furniture is the type that comes in a flat box and requires assembly. Some brands are better than others, but cheaper versions can get wobbly or fall apart the first time you move them. That doesn’t always mean the furniture is a total loss. With some 2x2s and 1x2s, screws and a bit of glue, you can reinforce and save the piece to live another day. It’s the connections that generally fail because the particleboard just isn’t as strong as real wood. Use any or all of these tips to strengthen the connections and help your furniture last.
- Choose 2x2s that are straight. No twists.
- Use construction adhesive or polyurethane glue wherever finished surfaces meet each other or meet raw wood.
- Use wood glue for joining raw wood surfaces.
- Use screws with matching finish washers for exposed screws.
- If the whole piece is wobbly, disassemble the whole piece to remove the back. Then use glue instead of nails to reattach the back.
- Bar clamps will make many of the fixes much easier.
Flat-Pack Furniture Assembly Details
Reinforce flat-pack furniture during assembly or later with 1x2s, 2x2s, glue and screws.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Caulk gun
- Drill bit set
- Drill/driver - cordless
- One-handed bar clamps
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Construction adhesive
- finish washers
- Polyurethane glue
- Wood glue