Tools and Supplies

All the tools and supplies for your home improvement projects in one place. Dive in and find the right tool for the job.

View More in:

Add Filter

    Tout icon

    18 Incredibly Handy Hammer Hacks

    The humble hammer is a go-to for most home improvement projects. But did you know it can do more than...


    Pickled Wood Finish for Interior Design and Decor

    Unlock the secrets of the chic pickled wood finish, from its Nordic roots to DIY vinegar tricks and the best...


    Tout icon

    10 Easy Ways to Cut Metal Fast

    Our best tips for getting your project done right.


    DIY Magnetic Tape Measure

    You'll want to add a magnet to the end of every tape measure after reading this tip!


    Patching Drywall: 10 Tips & Techniques

    Before you paint a wall you have to prepare the surface, which inevitably involves patching. It's one of the most...


    The Benefits of Adding a Key-Holed Ruler to Your Workbench

    Mount a removable metal ruler on the front edge of your workbench!


    Utility Knife Dot Hack

    I must have 4 or 5 utility knives at different spots around the house. And sometimes when they get dull,...


    Clamp Extenders

    Build some clever plywood clamp extenders to use when bar clamps are too short to do the job. It beats...

    You’ve Got Your Pallet, Now Where Do You Start?

    You've been eyeing a project that uses wooden pallets, but you're unsure how to get started. We'll show you the...


    Sanding-Belt Recycling

    Save a “used”sanding-belt to make specialized sanding tools. All you need is the belt, a pair of scissors and a little...


    DIY Dictionary: Setting Compound

    Setting compound is a powder which, when mixed with water, creates a fast-setting material used to fill gaps and cracks...


    What is an HVLP Spray Gun (And How It Compares)

    A standard spray gun—usually connected to a compressor—aggressively propels finish onto your project.


    Safety Gear Every DIYer Should Own

    As an avid DIYer, you have the necessary tools, but do you have the proper safety gear? Here are 12...


    Top 3 Spray Foam Insulation Sprays To Consider Using

    Not sure which spray foam to choose from? These have been reviewed as the top spray foams that will give...


    Best Way to Cut Threaded Rod to Your Desired Length

    When you’re shortening a bolt or threaded rod with a hacksaw, you always mangle the threads at the sawn end,...


    Tout icon

    How to Properly Use a Hole Saw

    Techniques for drilling big holes, deep holes and enlarging existing holes.


    DIY Dictionary: Plumb Bob

    A plumb bob is a weighted object connected to a string that can be used to establish a vertical line....

    Tout icon

    Saturday Morning Workshop: How To Build a Fold Down Workbench

    Every good workshop (even if it's just a sliver of your garage) needs a quality workbench with ample storage. Begin...


    DIY Dictionary: Sawzall

    What is a Sawzall? Sawzall—though a registered trademark of Milwaukee Tools—is the term often used to describe any brand of...


    DIY Dictionary: 16d Nail

    What is a 16d Nail? A 16d nail is one that is 3-1/2 inches long. But what does the 'd'...


    Tout icon

    Circular Saw Tips and Techniques

    Brush up on the basics with this collection of circular saw do's and don'ts


    Tout icon

    How to Scribe for a Perfect Fit

    Fit woodwork perfectly to even the waviest walls with an inexpensive compass.


    Reciprocating Saw Uses and Tips

    The ultimate remodeling tool—with attitude

    Shop-Made Edge-Gluing Clamps

    For about $30, you can fortify your bar clamp arsenal with these mighty tools. These clamps apply pressure horizontally as...


    Tout icon

    Reader Project: Mobile Flip-Top Workbench

    Family Handyman reader Christopher Rings sent us photos and drawings of his incredible workbench. We just might need to build...


    Tout icon

    12 Easy Things Everyone Should Know How to Fix

    Whether you're a new homeowner or an expert DIYer, knowing how to fix these common household problems can save you...


    How to Use Paste Wax for Table Saw Lubrication

    Using paste wax is the best way to lubricate the top of your table saw, which will help wood pieces...


    O-Ringed Router Bits

    Use rubber O-rings to help you position router bit shafts the right depth in the collet. Use 5/32-in. dia. O-rings


    Tout icon

    10 Awesome Hammer Hacks

    You can use a hammer to pound nails, but there's so much more you can do, too! Check out these...