A Longer-Pin Pinner
DeWalt has introduced a micro pinner that can fire 2-in. pins recessed into oak. It’s affordable, too. Many other name-brand versions that can do this cost at least twice as much. Learn how to use a trim nailer here.
This 23-gauge pin nailer excels at pinning together delicate material, leaving barely visible nail holes, and holding edge banding while the glue sets. It features a simple jam release latch to make removing jammed pins a cinch. And because it stops firing when you run out of nails, you don’t have to worry that you’ve been shooting blanks.
Smart Plugs to Ease Your Mind
How often have you been at work worrying whether you left the iron or space heater on at home? Well, if it’s plugged into a Wemo Smart Plug, worry no more—you can turn the power off when you’re away. Controlled by an app on your phone and connected to your home WiFi, these units offer some great features:
- You can schedule anything that’s plugged into it.
- You can use Voice Control with Google Assistant or Amazon Alexa.
- The “Away Mode” will randomly turn a lamp on and off while you’re on vacation.
- One model, the Insight shown above, enables you to monitor your energy use.
- Wemo Mini Smart Plugs are stackable and don’t block the outlet when they’re plugged in.
Note: These plugs control the power to the device that’s plugged in but not the device itself. For example, a lamp or humidifier will turn on when supplied with power, but a coffee maker will still need to have a button pressed. Single units vary by price.
Light and Comfy Work Boots
Work boots are rarely perfect. Some are super tough and offer solid support but are really heavy. Others are comfortable to walk in but not durable longterm. These San Jose 6in. boots by Keen have an unlined leather upper that is comfortable right out of the box. The footbed provides support for a full day’s work, and the wedge sole makes you feel like you’re gliding over the ground. It comes in three attractive colors with an aluminum safety toe. Plus: Check out these brilliant entryway boot tray ideas.
Rechargeable Work Light
This ROVER Pivoting Flood Light by Milwaukee fits in the smallest of spaces and has three light output modes, allowing you to choose maximum brightness or maximum runtime. The light head pivots 210 degrees for the best task lighting, making it great for working in tight mechanical rooms, crawl spaces and under the hood.
The REDLithium battery included is rechargeable via the USB cable. You can use the light’s magnetic base to mount it to metal, or the carabiner to clip it to overhead pipes or cables.
Deep-Reach Marker
FastCap’s Long Nosed Pattern Marker does a few things that a standard marker can’t, like mark through narrow holes with the needlelike tip, which is 1-1/8 in. long. The long, thin nose is great for tracing intricate patterns where a standard marker or pencil can’t get close enough to be accurate. The other end has a chisel tip for writing and general marking.
Leaf Blower
Whether in the shop, in the yard, or somewhere else, a leaf blower will keep your work areas clean and tidy. You can buy this tool here.
Heavy-Duty Scraper
Bahco’s 2-1/2-in. ERGO Paint Scraper is in a class by itself. The cemented carbide blades last much longer than conventional steel. The textured rubber handle provides a comfortable grip, and along with the knob, lets you use both hands so you can scrape with less effort. And the reversible blade is easy to flip when one side gets dull. —Tamar Hannah
This scraper comes in a few different sizes.
Change Your Bit with One Quick Flip
The Montana Modular Drill and Drive set makes drilling pilot holes and driving screws a snap. Everything you need is in one multipurpose unit. Drill the pilot hole, pull on the quick release, flip it over and drive the screw—perfect. The kit comes with all the sizes of countersink bits you’ll need, along with Nos. 1, 2 and 3 Phillips-head driving tips.
The Ultimate Hang-Stuff-On-The-Wall Tool
This Kapro 313 Measure Mate 24-in. layout and marking tool wears a lot of hats: It’s a horizontal and vertical level, a measuring stick, a straightedge for cutting picture mats and a centering tool. It even has a pull-out clip on the end to help hold screws and tiny nails while you install them.
To hang a shelf or rack with hidden keyhole mounts (which must be spaced the exact distance apart), align the two sliding markers with the keyhole slots, then position the level at the appropriate height and transfer those measurements to the wall. Your mounting screws will be dead level and correctly spaced. It’s great for cutting cardboard; the triangular shape keeps your fingers up and out of the way of your blade.