Hang your wheelbarrow on the garage wall to free up floor space.
Center a 2-ft. 1×4 across two studs, 2 ft. above the floor. Tack it into place, then drive 3-in. screws through metal mending plates and the 1×4, into the studs. Leave about 3/4 in. of the plate sticking above the 1×4 to catch the rim. Rest the wheelbarrow on the 1×4 as shown, and mark the studs 1 in. above the wheelbarrow bucket for your wheelbarrow hanger.
Drill pilot holes and screw ceiling hooks into the studs. Twist the hooks so they catch on the wheelbarrow lip and hold it in place.