Easy-Mount Mini Bins
Plastic lattice works well in the garage for storing long lengths of miscellaneous pipe, trim, flashing and conduit. Just cut matching pieces, then screw 2x4 cleats to the ceiling and screw the lattice to the wall studs and cleats. Now you can quickly find those oddball leftovers instead of going to the hardware store and buying yet another piece.
Elastic cords can quickly become a tangled mess. Find the one you need at a glance with this handy rack made from 3- or 4-in. PVC pipe. Just drill 1/2-in.-diameter holes in the pipe to match the slightly stretched lengths of your cords. Keep it in your trunk or shop, out of the reach of children.
Recycle Peanut Butter Jars
Racks for Canned Goods
Overhead Rag Roost
Make a little nest for your disposable paper rag box in the ceiling joists. Anytime you need a rag, just reach up and grab one.
Plastic Bag Dispenser
Don't file away the manuals for your kitchen and bath fixtures. Instead, slip them into a locking plastic bag and hang the bag in the cabinet under the sink. They'll always be right where you need them. Toss in paint samples and spare cabinet hardware too.
Portable Storage for Free
Nuts and Washers Stored on Pegboard
Old-fashioned shower curtain rings (12-packs available at home centers) can organize and conveniently display nuts and washers on your pegboard. Load up the rings, add a tape label, and hang them near the wrenches. You can also toss them in a nail apron for on-the-go repairs.
Hanging shoe bags are great for closets, but they can also cut the clutter in your garage, workshop or laundry room. A shoe bag like this one costs about $15 at discount stores.
Strips of colored masking or electrical tape take the confusion out of mating cordless tools with their chargers. No more matching by trial and error!
Magnetic Mini Storage
Want to build this handy storage roost for all the little screws, earplugs, nuts and washers in your shop? Pick up a pack of 4-oz. cups, a magnetic strip, several 7/16-in. washers and a tube of E6000 glue (available at craft and hobby stores). Apply glue to the cup's concave bottom, press in a washer flush with the bottom rim and let the glue set for 24 hours.
That's it. Mount the magnet, load the cups, snap on the lids and all your itty-bitties are easy to spot, nab and put away. Magnetic strips are available at woodworking stores and online. The magnetic strip provides more than enough magnet power to hold a cup crammed with screws.