18 Inspiring Inside-Cabinet Door Storage Ideas
Increase your home’s storage space by utilizing every possible nook and cranny, including the back of cabinet and closet doors. With inexpensive materials and basic tools you can easily and quickly make these clever storage boosters.
Kitchen Storage: Cutting Board Storage
Kitchen Storage: Cutting Board with Storage: Instant Knife Rack
Under-Sink Storage Bins
What’s hiding under your kitchen sink? If the space under your sink is anything like ours, it’s an overcrowded jumble of cleaning supplies, sponges and plastic bags. Here’s a great way to store these items right on the door of the sink cabinet. Cut a plastic storage tub in half with a utility knife and screw it to the inside of the cabinet door through the plastic lip at the top of the tub. Just make sure you position it so you can shut the cabinet door when all your bags and other supplies are in the bin.
Behind the Door Storage: Closet Glove Rack
Behind the Door Storage: Ironing Board Storage
Keep your imagination moving and check out these garage storage ideas.
Cabinet Door Message Board
A sheet of metal and a dry-erase board can turn any cabinet door into a convenient message center. You’ll find 2 x 2-ft. lengths of plastic-coated hardboard (often called ‘whiteboard’) and sheet metal at a hardware store or home center. Larger hardware stores will cut the sheet metal to your specifications. Be sure to get steel instead of aluminum so magnets will stick.
If you cut the metal yourself, wear gloves to protect your hands and use tin snips carefully. Use a metal file to smooth any ragged edges. If you don’t have a table saw to cut the whiteboard, flip it over, mark your measurements and use a jigsaw to cut it from the back to prevent chipping or splintering. To get a straight cut, use a framing square as a guide (photo, left).
To mount the metal sheet and whiteboard to the inside of the door, take the door off its hinges, lay it flat and carefully mask off the area where you want to spray the adhesive. Follow the directions on the can to apply the adhesive to the door, metal and whiteboard (photo, right). Mount the pieces, press firmly and let dry.
Behind the Door Storage: Cutting Board Rack
Measure between the door stiles to get the maximum width of your rack. Make sure the rack will be wide enough for your cutting board (or spring for a new one). You’ll also need to mount the rack low enough so it doesn’t bump into a cabinet shelf when the door closes. Cut the bottom and face rails to match the space between the cabinet door stiles.
Cut the sides 7-1/4 in. long. Nail the sides to the base. Then nail the two face pieces at the top and bottom to complete the rack (photo, left). The easiest way to mount the rack is to take the cabinet door off its hinges and lay it down. Predrill the screw holes for the L-brackets and mount the rack to the cabinet door using a 1-in. L-bracket centered on each side of the rack.
Behind the Door Storage: Tool-Apron Storage
Vacuum Gear Storage
Pullout Towel Rack
Pullout towel racks are typically meant for kitchens, but they’re also perfect for cramped bathrooms. They keep damp hand towels and washcloths off the counter so they can dry out of the way. You can find pullout towel racks at discount stores and online retailers.
Here’s a space-saving solution to the bathroom waste-basket problem. Screw wire shelf anchor clips to the inside of the door and hook the lip of a small wastebasket right on the hooks. It’s easy to use, it hides unattractive trash, and it frees up precious bathroom floor space.
PVC Curling Iron Holsters
Plastic Bag Dispenser
Behind the Door Storage: Charger and Cord Pockets
Kitchen Storage: Measuring Cup Hang-Up
Storage Behind Closed Doors
Pegboard is great for organizing kitchens, laundry rooms and bathroom cabinets. Rout a groove in a 1×2 frame using a rabbet bit, attach the pegboard with glue and brads, then mount it to the door. The frame helps support the edges of the pegboard and creates a 1/2-in. space behind the board so pegs can be inserted.