15 Smart Tips to Get Your Home Ready for Fall
With fall on the way, you’ll want to make sure your home is ready for the cooler months. Here are 15 smart tips to consider acting on before temperatures drop.
Replace the Furnace Filter
Protect the A/C Compressor or Risk Damage From a Falling Icicle
Get Your Property Ready for Snow
Before the snow flies, take a few minutes to inspect your property. Remove rocks, dog tie-out cable, extension cords, holiday light cords and garden hoses. Then stake out paths that run near gardens so you don’t accidentally suck up rocks and garden edging. Mark your walk and driveway perimeters by pounding in driveway markers. If the ground is frozen, just drill a hole using a masonry bit and your battery-powered drill.
Carbon Monoxide Season
You’ve got a house full of guests, so the oven and stove are working overtime, the water heater is struggling to keep up with demand, the fireplace is burning and the furnace is fighting the cold. It’s the perfect setting for carbon monoxide buildup. So if you don’t already have a UL-listed carbon monoxide detector, put it at the top of your shopping list. Detectors are available at home centers and discount stores. Get more information about carbon monoxide detectors and smoke alarms and keep your family and friends safe all year.
Check Your Chimney or Risk a Fire
Don’t remember the last time you had it cleaned by a pro? A quick way to tell if your chimney needs cleaning is to run the point of your fireplace poker along the inside of your chimney liner. If you find a 1/8-in. layer (or more) of buildup, call a chimney sweep. For additional expert chimney maintenance advice, check out what two certified professional chimney sweeps have to say.
Stop Airflow Up the Chimney
For fireplace chimneys that are seldom or never used, inflate a Chimney Balloon inside the chimney to stop the air leaks. Buy it directly from the company . Partially inflate the balloon by mouth or with a pump, then stick it into the chimney and blow it up the rest of the way.
Putting in and taking out the reusable balloon can be messy (here’s when to clean a chimney flue), so you don’t want to hassle with chimney balloons if you regularly use your fireplace. But that doesn’t mean you have to settle for energy loss. Instead, you can install a chimney-top damper system, like the Chim-a-lator, which seals the top of the flue when the chimney’s not in use. A lever in the fireplace controls the damper via a long cable.
Installation involves attaching the damper and screened-in cap to the chimney top, then mounting the lever in the fireplace. If you don’t feel comfortable working on the roof, hire a chimney sweep or mason, who can install the system for you.
Check Your Water Heater
Clean Weep Holes
Drain Garden Hoses or Waste Money on Replacements
Gary Wentz, Editor-in-Chief
Insulation is Key
No-Ladder Gutter Cleaner
This gutter cleaner is inexpensive, takes about 10 minutes to make and will help you avoid ladder climbing. Buy 3/4-in. PVC pipe, two elbows, a garden hose coupling and a cap at a local home center. Drill 1/16-in. holes in the cap as shown. Make the handle long enough to comfortably reach your gutters, and cement the parts together with PVC glue.
Bleeding a Hot Water Radiator
If some fins of your hot water radiator stay cold while others get hot, don’t despair. Your radiator has some trapped air, and getting rid of it is simple. At the top of your radiator, look for a small valve like the one shown. Use a radiator key, 1/4-in. 12-point socket, or a flat screwdriver (depending on your valve type) and slowly turn the valve counterclockwise until water starts dripping out. This will release trapped air and let hot water into the cold fins. While you’re at it, you should repeat the process with your other radiators.
Bleeding the radiators will lower the pressure in your system, so you might have to slowly add water to increase the pressure. Do this by opening, then closing, the valve on the water pipe above the boiler. In fact, you may need to add water while bleeding the radiator in order to purge the air from the system. This is where a helper will save on trips up and down the stairs. If you’re unfamiliar with your system, call a pro.
How much pressure you need depends on how high the water has to rise. The basic rule is 1 lb. of pressure for every 2 ft. of rise. Your gauge may read in pounds, feet or both. A basic two-story house, with the boiler and expansion tank in the basement, needs 12 to 15 lbs., or 25 to 30 ft., of pressure.
Apply Heat Reducing Film
Three Easy Winterization Steps for Your Lawn Tractor
- Moisture inside an unused engine leads to corrosion. ‘Fogging’ the engine—spraying an oily mist into each cylinder—prevents this. All you have to do is remove the spark plugs and blast in some aerosol fogging spray (sold at auto parts stores). Then reinstall the spark plugs.
- Storing a battery that isn’t fully charged can lead to permanent damage, especially in cold weather. Connect the battery to a battery charger and charge it until you get a reading of 12.7 volts.
- Stored gas will slowly gum up the whole fuel system, and the repairs can be expensive. So add a fuel stabilizer such as STA-BIL or Seafoam to the gas tank before winter. (Adding stabilizer to your gas can year-round is also a good idea.) But remember that stabilizers aren’t effective in gas that contains ethanol. If you don’t know whether the gas contains ethanol, run the engine until the tank is empty.
Another tip: Cover the air intake and exhaust openings with plastic wrap or aluminum foil to keep critters from homesteading in your engine over winter.