Panpipe Tool Storage
Pipe Clamp Holder
Cut a 2-in.-diameter PVC pipe 6 in. longer than the spindles you're staining, wash it thoroughly and glue a cap on one end with PVC cement. Drill or saw a 2-1/2-in. hole in one end of a scrap board and screw the board to a sawhorse to support the pipe. Twist a small screw hook into each spindle end and a screw eye into a 6-in. dowel handle.
To stain, suspend a spindle in the pipe and fill the pipe until the spindle is submerged. Wear a garden glove over a plastic glove and pull up the spindle while wiping off the excess stain. Then hang the spindles on a knotted rope to dry. Add small amounts of stain to the tube each time to compensate for what gets used.