28 / 40
PVC Tool Pockets
Holster your screwdrivers, chisels, files and other hand tools in 3-in.-long pieces of 1/2- and 3/4-in. PVC pipe. Cut away the upper open section with a hacksaw or band saw, drill a hole, screw the piece on a board, and drop in the tools. If you're using a band saw, slice off the cutaway section from a long length before cutting off the 3-in. holster.
29 / 40
Panpipe Tool Storage
While this tool storage device may look like a variation on the Pan flute of Greek mythology, it's actually a great place to store tools that easily get lost—like chisels, files, pencils, scroll saw blades and hobby knives. For the fatter tools, use PVC cement to join short pieces of 1-1/4-in. PVC pipe side to side into a panpipe design, then add pieces of 1/2-in.pipe along the front of the flute for skinnier tools. Build a simple case around the pipes to create a floor and a back for hanging on a shop wall.
30 / 40
Pipe Clamp Holder
Store bar and pipe clamps right under your workbench where they'll always be close at hand. Just screw sections of 4-in.-diameter PVC pipe under your workbench and slide the clamps into the pipe.