PVC Storage Hangers
It's true—we love PVC pipe. Or let's say we appreciate the way it inspires and accommodates tool and hardware storage. Here's the latest PVC gem. Cut 2-in. pieces of 3-in. PVC and saw away a 2-in. section so it looks like Pac Man. (Remember Pac Man?) Drill screw holes and attach the hangers to studs or shop walls. Space pairs for convenient horizontal storage of longer tools such as levels and glue clamps, and use single segments for ropes, electrical cords or anything else that you want securely stored yet easily accessible. Try this tip and you'll learn never to be peeved by leftover PVC.
PVC Pipe Clamp Rack
To make the rack, cut 2-in. lengths of PVC, and with a hacksaw or band saw, slice them lengthwise about 3/16 in. past the diameter's center line. This creates the gripping action to firmly hold the heavy iron pipe. Drill and countersink two holes in each PVC piece, then space and screw them along a pair of 2-in.-wide boards. Attach the upper board to your shop wall and snap a pipe clamp in either end to position the lower board for screwing to the wall. Plus: 28 secret clamping tricks from woodworkers.
PVC Tool Pockets
Holster your screwdrivers, chisels, files and other hand tools in 3-in.-long pieces of 1/2- and 3/4-in. PVC pipe. Cut away the upper open section with a hacksaw or band saw, drill a hole, screw the piece on a board, and drop in the tools. If you're using a band saw, slice off the cutaway section from a long length before cutting off the 3-in. holster.