Fill a sturdy cardboard box with sawed-off shipping tubes or scraps of larger PVC pipe. Then use it to store and organize all those short pieces of molding, pipe and dowels.
Quick-Draw Table Saw Accessories
Keep your table saw's miter gauge and push stick within easy reach with a couple of sections of 1-1/2-in. PVC pipe bolted or zip-tied to a convenient spot on the frame under the table. Attach the miter gauge holster using the existing frame bolts, or drill holes in the legs for machine screws. For the push stick holster, we drilled a couple of sets of matching holes about an inch apart on the pipe and tautly zip-tied it to the leg.
PVC Dust Catcher
Vacuum dust and chips right at the source! Bolt a 2-in. pot magnet (available at home centers and hardware stores) to a 4-in. x 2-in. PVC pipe reducer and position it near the sander, saw, router or lathe that's making a dust storm in your shop. A 2-in. shop vacuum hose 'press-fits' nicely in the 2-in. reducer end, and the pot magnet ferociously grips any metal surface.
If the working surface near the dust source is wood, screw a blank steel electrical box cover to the surface to hold the dust chute on target. Find many more tips on using your shop vacuum for workshop dust collection in this guide.