Cut It Up With a Circular Saw
Sledgehammers, pry bars and reciprocating saws aren't the only demo heroes on the job site—your circular saw can be used for a heck of a lot more than cutting studs and sheets of plywood. Fitted with the right blade, your circular saw can cut up roofing, tin, concrete, rebar, steel doors and fiber cement. With a demo blade, you can cut up nail-embedded debris all day long.
Rent a Walk-Behind Floor Scraper
Some old vinyl sheet or tile floors are super easy to pull up. Others are so thoroughly glued down that you're lucky to remove quarter-size chunks with every whack of your handheld floor scraper. If a shovel and hand scraper are just not getting the job done, rent a walk-behind scraper. For about $50 to $60 a day, you can save yourself a bunch of time and prevent a whole lot of wear and tear on your back and wrists. Many floor scrapers have an attachment for busting up ceramic tiles as well.
Cut Fiberglass Surround Into Pieces
Some bathrooms are built around a shower or tub surround. This means that even if you manage to remove all the fasteners holding it in place, the odds are you're not getting that surround out the door in one piece. You're going to have to dice it up. Make the long cuts with a circular saw, and finish the curved areas with a recip saw. Wear eye protection because fiberglass throws a bunch of chips when it's cut. And a dust mask is a must—fiberglass dust is not something you want to breathe in. Most important, thoroughly investigate the areas where you'll be making your cuts, to avoid severing any electrical wires or plumbing pipes.