First, chuck the spade bit into your drill. Make sure it’s held in tight because you’ll be applying pressure to it. Then, insert the spade bit into the center of the bottom of the apple. To peel, simply run your peeler over the edge of the apple while you hold down the drill’s trigger. As the apple rotates, the peel is quickly cut off.
DIY Electric Can Opener
Do you have lots of cans to open? Are you tired of using a manual can opener? You can make your own electric can opener with your drill!
Carefully remove the can opener’s crank handle. We clamped ours into a vise and ground out the pin holding the handle in with a grinder, but a combination of pliers and twisting would accomplish the same thing.