21 of Our Favorite Handy Hints for Every Room in Your Home
We’ve accumulated a fair amount of great tips over the years, so check out 21 of our favorite handy hints for every room in your home.
You can build a simple dispenser for your trash bags using 1/2-in. pipe and a few fittings. Screw a floor flange to the cabinet, thread in a 3-in.-long pipe nipple, and then thread a 90-degree elbow onto the nipple. Cut the vertical pipe so it’s a bit longer than the width of the roll of bags. Thread the vertical piece into the elbow and slip on the roll.
Check out these 18 clever kitchen hacks you’ve never thought of before.
Wood putty is often a one-time use product for me. Before I even think about using it a second time, it’s dried out. The trick I found was to fill an empty paint can with water and store all my putty jars submerged so no air can get in. Now I can finally say that I have seen the bottom of a putty container. – Kim Boley
Ever wish you could reorganize your garden after seeing how the mature plants look? Here’s a clever way to do it. You’ll need a bunch of pots of the same size, so they’ll nest in each other. Put your plants in doubled pots, and then bury them at ground level. Whenever you want a change, lift out the top pot and put in a different one. This method is also really slick for bringing plants indoors over the winter. This method is great for quickly changing out seasonal plants, and allows for easy experimentation with color and placement of plants and flowers.
Want to add more color to your landscape this season? Check out these 49 Colorful Plants to Brighten Up Your Landscape.
A handy way to store small metal items such as nail clippers, tweezers, etc., in a bathroom cabinet is to simply stick a few magnets to the back of the cabinet or inside the cabinet door for holding the items. Then they’ll be organized and in plain sight when you need them. Check out these 13 tricks for cleaning a bathroom faster and better.
You may need to use a bit of double-sided tape or hot glue to mount the magnets where you want them. Be sure to use the inexpensive gray disc magnets, as the expensive neodymium magnets do not want to let go of your items! — David Farrand
Stop shrinking your sweaters! When you put a load of clothes into your washing machine, use a dry-erase marker to note on the lid which items should not go into the dryer. That way, whoever switches the load from the washing machine to the dryer will know which items to leave out for line drying.
The enamel finish on most washing machine lids is similar to a whiteboard, and dry-erase markers can be removed easily with a dry paper towel. These 20 small laundry room ideas make the most of what little space you have in your laundry or utility room.
Make this simple-yet-useful computer shelf for your desk with a few pieces of scrap wood and a nail gun. We built the one shown with a 1 ft. x 2 ft. piece of plywood and two pieces of a 1×3 board cut to 12 in. lengths. Then we used a brad nailer to attach the plywood to the boards. Learn more DIY office hacks here!
You could paint or stain the assembled piece to match your room décor or leave it as is for a purposefully unfinished look. The shelf will raise your computer screen to an ergonomic height, making it easier to see and more comfortable to work at your desk!
Want to make any rug feel extra plush and luxurious? Add a layer of carpet padding underneath your rug—it’s thicker and cheaper than a typical rug pad. Your feet will thank you! Check out these 30 life hacks you’ll wish you knew sooner.
To avoid a lot of string trimmer work, I like to mow as close as possible to trees and buildings. But the grass chute on my riding mower prevents it. So I drilled a hole in the chute and tied a rope from the chute to a handle on the side of the tractor. Now I can lift up the chute without missing a beat, and cut way down on string trimmer work. — Travis Larson
Take the guesswork out of hanging picture frames, shelves and other items with “keyhole” hangers. To begin:
- Stick a piece of masking tape over the keyholes, and then trace over the keyholes with a pencil, making a template.
- Making sure it’s level, stick the template on the wall where you want the shelf.
- Drill your anchor holes or screws into the template and remove it.
Even if you know your way around a tape measure, there’s sure to be some new tricks you haven’t seen in this list of 25 tips and tricks to take your measurement mastery skills to the next level.
“Furnace filters are often hard to get hold of. Before installing them, I make a ‘grip tab’ on the corner to make them easy to pull out and replace.” — Bill Williams
“My wife sews kids clothes and uses a curtain tension rod to hang them in a closet. She explained to me one day that the pole was frequently slipping and falling down. So, I searched and found an object that could be screwed into the wall and would fit around the ends of the tension rod: water bottle caps. Check out these 21 cheap closet updates you can DIY.
“I used drywall screws to secure two water bottle caps into studs in the closet walls, and then I mounted the tension rod inside the bottle caps. The lip on each cap provides just enough support for the tension rod, so it doesn’t fall down anymore.” — Rodney Sheets
Keeping your car clean can be difficult. There are dirt roads, messy trees, pet hair, food crumbs and wrappers. And there’s likely trash on the car’s floor, under the seats and in the seat cracks. Toss out any wrappers, bottles and other objects in a sturdy car trash can! Line a plastic cereal container with a grocery bag and use it as an in-car trash can. To keep the container upright, apply a strip of self-adhesive hook and loop fastener to the bottom of the container, so it’ll stick to your car’s carpet.
Get your vehicle looking like new with these 36 simple interior and exterior car detailing tips that you can do yourself.
If you have a yard or a garden, you know that there are a lot of long-handled tools involved. If you don’t have any pallets lying around, they are easy to get for free. This is a quick one-hour project and after you’re done, your tools will be organized and easy to reach.
You could easily attach this pallet to a fence, shed or to the exposed wall studs in your garage. No matter what you choose, you’ll want to make sure that your screws are long enough to go through both your pallet and the wall you are attaching it to. We drilled two screws into the pallet, one into each exposed wall stud. You won’t need a ton of screws or nails because the pallet isn’t all that heavy.
Looking for more ways to work smarter in your workshop? Here are 19 tips from a seasoned woodworker and do-it-yourselfer.
I only own one watering can, so I need to refill it four or five times to water all of the plants on my patio. Instead of buying more overpriced watering cans, I use old milk jugs. I drill a few holes in the caps, fill up the jugs with water and I’m good to go. — Harrison Berg
Have your walls been redecorated with some original crayon masterpieces? Don’t lose your cool. Just grab a rag, dip it in some baking soda and lightly scrub the marks. They will come off with a minimal amount of effort and give your young Picasso a fresh, new canvas.
If you forget to empty the tank on your dehumidifier, it’ll either overflow or shut off. That defeats the whole purpose of running a dehumidifier in damp areas. I didn’t have a floor drain in that part of the basement, so I bought a condensate pump ($40 to $100 at home centers) and tubing and rigged it to my dehumidifier. Then I ran the tubing up to the ceiling, through the joist areas and down to the laundry tub. Now the dehumidifier runs full time, and I never need to empty the tank or worry about it shutting off. — Doug Baltzer
Check out these 9 Affordable Ways to Dry Up Your Wet Basement For Good!
There’s a lot of storage space under the bed. The problem is keeping items contained, orderly and easily accessible. This under-bed drawer covers all the bases; Roll it out for access and roll it back in when you’re done. Before building, measure the height beneath your bed frame and alter our dimensions to suit. Here’s how to make this under-bed storage drawer.
My kitchen drawers used to be an absolute wreck; pans and dishes crammed in however they’d fit. And nearly every time I needed something, it was always at the bottom of the drawer. My solution was to cut a piece of 1/8-in. pegboard to the size of the drawer bottom and attach dowels using screws from underneath. Now my pans are organized and easy to access. The 10 minutes it took to build was easily made up for with how much frustration it has saved me. — Kathy Rodgers
Fill a mason jar with wine corks and rubbing alcohol, and let the corks soak. The corks will burn ok in a couple of days, but for best results, soak them for a week. Be sure the corks are natural, not synthetic.
Fire pits come in all shapes and sizes. Check out our 37 favorite fire pits, and be inspired to create a cozy gathering spot in your backyard.
We’re sure you’re stocking up on sweet smelling candles to make your home extra cozy for the colder months. But, if your candles are burning too low to reach the wick, there’s no reason to go without your favorite scent. Instead of burning your fingers, light a piece of uncooked spaghetti. It’ll reach into those deep candles and burn long enough to light the candles on grandpa’s birthday cake!
Everyone enjoys saving money, especially when it comes to improving your home. So check out these 35 amazingly cheap handy hints using everyday items.
I never have enough space for wine storage, so I made this wine rack using pantry shelves and 1x2s. I used a router to round over the top edges of 1x2s, cut them so they’re a few inches shorter than the shelf depth; then spaced them about 2 in. apart. Then I screwed them to the shelf. I adjusted the shelf spacing so there’s about 5 in. of clearance for the bottles. — Robert Lackey