How to Troubleshoot Windshield Washers
Updated: Dec. 30, 2019
Restore washer fluid flow of your windshield washer in minutes with this how-to guide.
A windshield washer that doesn't pump enough fluid is annoying and even hazardous. This quick diagnostic checklist explains how to find and fix the problem.
You might also like: TBD
Checking flow and clearing clogs in your windshield washer
Photo 1: Check pump operation
Follow the windshield washer tubing from the reservoir to the tee. Disconnect the tubing and have a friend press the washer button. A strong stream of washer fluid indicates a good pump but a clogged nozzle.
Photo 2: Blow out the nozzle of your windshield washer
Press a rubber-tipped compressed air gun against the nozzle opening and blow air backward through the nozzle (tubing still disconnected at the cowl). Then reconnect the tubing and try the washers again.
If you press the button for windshield juice and nothing comes out, you probably have a clogged windshield washer nozzle. Start your diagnosis by making sure there’s fluid in the reservoir. If so, check for fluid flow at the tee near the cowl (Photo 1). If that checks out, leave the tubing off the tee and clear out the nozzle with a compressed air gun (Photo 2). However, if you couldn’t get fluid flow at the tee, you probably need a new pump (see our article on “Windshield washer repair” ).
Required Tools for this Windshield Washer Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
You’ll also need a rubber-tipped compressed air gun
Originally Published: December 30, 2019