Save on Pinterest

Clip-and-Snip Holiday Wreaths

Updated: Dec. 17, 2021

Venture into your backyard to gather materials for these fresh and easy-to-make wreaths. It's the perfect way to tie your holiday decor into the landscape.

BL10470C32 holiday wreaths diy
Store-bought wreaths tend to be so unimaginative and dull, even if you add a colorful ribbon. Here's a solution— make your own! All the materials you need are in your backyard. What could be easier? And it's the perfect way to tie you holiday decorating into the landscape.

You might also like: TBD

Project Overview: DIY Holiday Wreaths

BL10470C32 holiday wreaths diy

The best part about making your own holiday Christmas wreath is that you can use all sorts of plant materials— no need to limit yourself to the standard balsam fur or spruce twigs.

Granted, early winter is not the time to be pruning any trees or bushes, not even evergreens. The best time is late winter or early spring. But rest assured that the selective snippings you will be taking here and there will barley alter you plants’ appearance or harm them. If you’re worried just cut down low of from the back of a plant. And make sure you clip from a variety of sources so no one plant takes the brunt of your trimming.

Getting Started

To get started, go outside with sharp pruners and a collecting bad. Mid-morning is ideal because any overnight frost or snow has probably cascaded off by then. Plus, the plants contain the greatest amount of moisture at that time.

Go to the evergreens first. They’re traditional, plus they always make a good base backdrop and are durable. Seek out a range of textures and keep an eye on color; hunt for a variety of hues, as well. Arborvitae, fir, Douglas fir, cedar, false cypress, juniper and various kinds of spruce trees are excellent choices, as are short-needled pines. Avoid longer needled ones because they’re lankier and harder to work with.

While you’re out, you’ll notice other potential sources of attractive additions. Holly sprigs, with or without berries, bring an irresistible sparkle to a wreath. Even spent flowers and pods clinging to plants are worthy choices.

For a final burst of color, don’t forget berries or fruits of the season— barberries, rose hips, winterberries, juniper berries and so forth— and cones. As you cut, try to get a but of base on these extra items to help with attaching.

It’s important to cut long stems, between 3 and 6 inches where possible. This gives you more to work with and keeps your trimmings well anchored throughout the holidays.

Project Directions

1. Make a wreath frame

BL10470C33A making a wreath

For a wreath that will last, you’ll need a sturdy frame. Store-bought frames are perfect and inexpensive. You can also make your own from a base of sphagnum moss and a wire wreath frame (as seen above). Just dump the moss into a bowl or pan and moisten it slightly, then press it into the frame. Wrap it in place by winding green nonadhesive floral tape around it until it is secure. Overlap each turn by only about 1/4 inch, or the plastic layer will be too thick for poking twigs through.

2. Assemble by layers

BL10470C33B making a holiday wreath

Choose one or two types of substantial cuttings for the base of your wreath. Strip the ends of the stems and poke the springs into the moss (remember to give them long enough stems to stay in place). If the stems are too short, wrap them with florist wire and poke them in place. Work your way entirely around the frame at least once. Each twig will hold in place, especially if its stem is long enough to stick deep into the dampened moss. In frigid weather, the twigs will be frozen in place.

3. Add layers

BL10470C33C holiday wreath layers

Holiday wreaths will be more attractive if you work with one sort of plant material at a time and at least once around. The final goal is make the wreath so full that the base is completely hidden from view (as seen above). Add decorative flourishes— berries and cones— last. If you tuck them in too soon, they can get obscured from view.

Make a hook from a loop of wire. Hang it and stand back. Fine-tune your composition, adding a bow if needed. Then proudly hang it in the most prominent place— the front door. You can also use a wreath hanger for an easier way to hang your wreath.

Make your holiday wreaths last

Homemade wreaths last many weeks outdoors, especially if the weather is cold. To keep it fresh, mist occasionally if it looks like it is drying out. A sphagnum-base wreath can be brought inside occasionally and immersed in a sink of water. Hang to drip-dry before rehanging it on the door.