Save on Pinterest

Building With Bamboo: Planter and Trellis

Use these tips and tricks when building with bamboo to make your planter and trellis strong.

bamboo planter box and trellisFamily Handyman
Bring plants and flowers to your deck or patio with this handsome, but easy-to-build bamboo planter box and trellis. And use it as a privacy screen as well. Materials cost about $100 and you can build it in a weekend.

You might also like: TBD

Time
Multiple Days
Complexity
Intermediate
Cost
$101–250

Bamboo Planter Box & Trellis Overview: Materials, tools and costs

If you’re wishing for wisteria or craving clematis, you can plant them just steps away in this planter and trellis for your deck or patio. And if you build a pair of them, you can create a privacy screen or provide shade from the late afternoon sun.

Similar planter/trellis combinations—made of wood or plastic—can cost $200 or more at garden centers. But you can build this one for as little as $100 in one weekend.

To build this planter, you’ll need standard woodworking tools like a table saw and a miter saw. If you want to round the edges of the wooden parts as we did, you’ll also need a router and two round-over bits (1/4- and 1/2-in. radius). Our total materials bill was about $140. Your cost will depend mostly on the wood you choose for the planter box. We built our planter from “select-grade” pine boards, which cost about $60 altogether. If you don’t mind a few knots, use construction-grade pine, which will cost about $20. If you live in a damp climate, consider rot-resistant choices like cedar or teak. Pressure-treated lumber is another good choice because it costs about the same as construction-grade pine and lasts practically forever. The drawback is that you may have to let it dry for a month before you start building.

Small-diameter bamboo for the planter box slats and lattice is in stock at most home centers and garden centers. The bamboo we used was labeled “3/4 inch.” To find 1-1/2-in.-diameter bamboo for the trellis posts and header, visit a large garden center or shop online (search for “bamboo poles”). You’ll find lower prices online, but those savings may be offset by shipping charges. We bought our bamboo at a garden center and spent about $50. Select straight poles for the trellis posts and header.

Bamboo Planter Box and Trellis

This bamboo planter box and trellis looks handsome on a patio or deck and is durable as well.

Master a New Material

Bamboo is one of the world’s greatest building materials. It’s incredibly strong, good-looking and cheap. And if you’re a weekend woodworker, you already have the tools to work with it. But bamboo doesn’t behave exactly like wood, so you’ll also need some new tricks up your sleeve. We’ll show you how to build with this hard and brittle, irregular and hollow material.

Step 1: Build the Bamboo Planter Box

Photo 1: Build four frames

Glue together the frames that form the sides of the planter box. Clamp a framing square to your workbench to help align the parts.

Photo 2: Mask the frames

Line the backs of the frames with wide masking tape. When you finish the wood later, the tape will keep stain off the bamboo.

Photo 3: Glue on the bamboo

Fill the frames with bamboo slats. Screw the first slat in place and set the rest in heavy beads of construction adhesive.

Photo 4: Assemble the bamboo planter box

First screw the frames together at the corners. Then screw on the legs from inside the box and add the floor and top rim.

To get started, rip four 8-ft.-long 1x6s into strips on your table saw. You’ll need two 2-3/4-in.-wide strips for the top rim, two 1-3/4-in.-wide strips for the cleats and legs, and four 2-1/2-in.-wide strips for the legs, rails and stiles. Glue the rails and stiles together to make frames (Photo 1). Sand the frames and round the inside edges with your router and a 1/4-in. round-over bit. Then mask around the frames (Photo 2).

You’ll need to cut about 120 slats to fill the frames. To avoid measuring them all, clamp a stop block next to your-miter saw. With the slats cut, mark guidelines 1-1/4 in. from the top and bottom of the frames and glue the slats between them (Photo 3). Place the best side of each slat face down. Alternate thin and thick slats, and the direction of the tapers—one narrow end up, the next down.

While you’re waiting for the adhesive to harden, glue together the planter legs. Round the edges with a 1/2-in. round-over bit.

Assemble the planter box (Photo 4). Take diagonal corner-to-corner measurements to make sure the box is square before you screw the pressure-treated floor boards to the cleats. Top off the planter box with rim boards, mitered at the corners and screwed to the frames. We rounded the edges of our rim material with a 1/4-in. round-over bit before cutting it to length. The rim overhangs the inside of the box by 1/2 in.

Figure A: Bamboo Planter Box and Trellis Details

Overall dimensions: 40 in. wide x 18 in. deep x 72 in. tall. All wood parts are 3/4 in. thick. Bamboo parts vary in diameter from 3/8 to 3/4 in. unless otherwise noted.

You can download Figure A and enlarge it in “Additional Information” below. Also find a complete Materials List in “Additional Information” below.

Step 2: Build the trellis

Photo 5: Build the lattice on a frame

Screw the first layer of bamboo poles directly to the frame, using spacer blocks to position them. Drill a pilot hole for every screw; bamboo splits easily.

Photo 6: Wire the lattice together

Tie the second layer of bamboo to the first with wire ties. Twist until the looped ends snap off. Then bend the remaining wire flat against the bamboo.

Photo 7: Cut out the lattice

Trim the completed lattice off the frame by guiding a jigsaw or reciprocating saw along the inner edge of the frame.

Photo 8: Prevent cracks with kerfs

Cut saw kerfs in the posts and header. This prevents random cracks From developing later. To cut safely, screw the bamboo to a 2×4.

Photo 9: Cut “saddles” with a hole saw

Create rounded ends on the trellis posts to hold the header. For a clean cut, run the drill at high speed and apply light pressure.

Photo 10: Screw on the header

Screw the header to the posts. Drill pilot holes to avoid splitting the bamboo. Attach the lattice to the rungs using wire ties.

To assemble the lattice, first grab any 1x4s or 2x4s you have handy and build a 1×4 frame with inner dimensions of 2 x 4 ft. Take diagonal corner-to-corner measurements to make sure the frame is square. Lay the first pole across the frame from one corner to the other and screw it to the frame. Then add more poles, screwing each to the frame (Photo 5). Although it’s time-consuming, you must drill a pilot hole for every screw—otherwise, the bamboo will split.

Attach the second layer of bamboo with wire ties and a “twister” tool (Photo 6). Wire ties are designed to connect the rebar that reinforces concrete, so you’ll find them and a twister in the masonry aisle at home centers. For a neat, tight connection, pull upward on the twister as it spins. When the lattice is done, cut it out of the frame (Photo 7).

Next, build the bamboo frame that will hold the lattice. Start by cutting kerfs in the posts and header (Photo 8). Bamboo can develop wide cracks as it dries out. Cutting a kerf creates a single, straight opening and prevents random splitting. Then cut the tops of the posts using a 1-1/2-in. hole saw (Photo 9). Glue 4-in.-long 3/4 x 3/4-in. wooden plugs into the posts to provide anchors for the screws that fasten the header. The plugs don’t have to fit tight; just use lots of construction adhesive.

Drill the posts with a 3/4-in. hole saw to create sockets for the rungs. Don’t use a spade bit; the bamboo will split. Insert the rungs and measure the spread of the posts. To fit into the planter box, the spread must be no more than 27-1/2 in. Cut the rungs a bit shorter if needed and then glue them into the posts with construction adhesive. Attach the header (Photo 10). Leave the trellis frame on a flat surface until the adhesive hardens, then attach the lattice to the rungs. When you screw the completed trellis to the planter box, insert wooden blocks behind the bottom ends of the posts. Bamboo isn’t perfectly straight, so you’ll have to experiment with blocks of different thicknesses to make the posts plumb.

Using Tie Wires

Wire ties are simple to use: Bend each tie in half and slip it over the bamboo. Then hook the looped ends with the twister tool and spin. For faster twisting, cut the handle off the tool and chuck it into a drill (Photo 6).

Step 3: Finishing details

We finished our planter box with deck stain. When you’re done finishing, slice the masking tape around the box frames with a utility knife and peel off the tape. Add plastic furniture glides to the legs to keep the wood from soaking up moisture. To hold soil, we used a 12-1/2-in. x 27-in. plastic planter. You could use two or three smaller pots instead.

Additional Information

Required Tools for this Bamboo Planter Box and Trellis Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Caulk gun
  • Circular saw
  • Clamps
  • Drill bit set
  • Drill/driver - cordless
  • Framing square
  • Hole saw kit
  • Jigsaw
  • Miter saw
  • Router
  • Table saw
  • Tape measure
  • Utility knife
You’ll also need a twister tool for the tie wires.

Required Materials for this Bamboo Planter Box and Trellis Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.

  • See Materials List in "Additional Information"

Popular How-To Videos