Best-Kept Secrets of Professional Painters

Learn how to paint like a pro and pick up some great tips for achieving a perfectly smooth and even paint job.

Our editors and experts handpick every product we feature. We may earn a commission from your purchases.

1 / 19
best trim paint white window trim painting
Family Handyman

Paint the Trim First, Then the Ceilings and Walls

Finally, the answer we’ve all been waiting for. Professional painters usually follow a certain order when painting a room. They paint the trim first (the Bucket Edge is a must-have tool that leaves trim and other surfaces untouched while painting), then the ceiling, then the walls. That’s because it’s easier (and faster) to tape off the trim than to tape off the walls. And you certainly don’t want to tape them both off.

When painting the trim, you don’t have to be neat. Just concentrate on getting a smooth finish on the wood. Don’t worry if the door and trim paint gets slopped onto the walls. You’ll cover it later when painting walls. Once the trim is completely painted and dry (at least 24 hours), tape it off (using an “easy release” painter’s tape), then paint the ceiling, then continue on to wall painting.

Shop Now

2 / 19
woman painting a wall in her home
svetikd/Getty Images

To Avoid Lap Marks when Wall Painting

Lap marks are those ugly stripes caused by uneven layers of paint buildup, a common problem when wall painting. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute) Avoid lap marks by maintaining a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint begins to dry.

To maintain a wet edge, paint an entire wall all at once. Start at one end, running the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller so you’re less likely to leave paint ridges.

3 / 19
painting room

Clear the Entire Room Before Painting

If something is too big to take out, move it to the center of the room and cover it with plastic. Use canvas drop cloths. Unlike plastic, they stay put without tape and aren’t slippery. Another thing to remember before starting is you must compare different types of paintbrushes to choose the right paintbrush. You can also learn how to sponge paint a wall.

Shop Now

4 / 19
interior painting tips cut tape loose
Family Handyman

Avoid Drips as you Paint

Masking tape does a good job of protecting woodwork — if it’s applied well.

Clean off all the dirt and grime along the edge of the trim with a damp rag. Hold the tape tight against the wall and roll it out so the tape covers the edge. Press the tape against the wood with a putty knife along the entire length. Use painter’s tape that’s at least twice as wide as the trim and leave it flared out to protect the face of the trim from drips. When you’re done, remove the tape immediately while the paint is still wet or wait until the next day when it’s totally dry. If you pull it free when the paint is partially dry, you may peel off bits of fresh paint along with the tape.

Shop Now

5 / 19
trim paint tips circle marks
Family Handyman

Shine a Light Across the Woodwork and Circle Flaws

Position a hand-held bulb (at least 60 watts) so it shines across (rakes) the wood surface to detect loose paint, rough edges and other blemishes in the surface to determine what needs to be filled. Take a pencil and lightly circle spots that need work.

6 / 19
NOV_2004_014_T_01

Consider Liquid Sandpaper, Especially on Lead Paint

After final sanding and vacuuming, some pros go the extra step of wiping woodwork down with a liquid deglosser such as bonding primer or ESP by Flood. This step will ensure a good bond. And if you have to deal with lead paint, this step can replace sanding.

Shop Now

7 / 19
vacuum trim paint prep dust
Family Handyman

Dust and Vacuum Thoroughly

When the first sanding and scraping step is complete, dust off all areas with an old paint brush and vacuum woodwork with a brush attachment.

8 / 19
Family Handyman

Fill All Holes, Even Small Ones

You might assume new paint will hide tiny dents and scratches, but it won’t. In fact, the new coat of paint highlights minor flaws. Fill dents less than 1/8 in. deep with spackling compound. For deeper holes, use a two-part filler or an epoxy wood filler. It’s more of a hassle to use and you usually end up throwing away a lot of partially hardened filler (mix small batches), but the patch will be hard enough to take a lot of abuse without falling out.

Shop Now

9 / 19
Family Handyman

Run a Crisp Bead of Caulk Between Woodwork and Walls

Apply a thin bead of paintable acrylic latex caulk only inside the crack where wood meets a wall for a smooth, professional appearance. Remove extra caulk with a putty knife. And buy a dripless caulk gun to save time and frustration. Cut the tip smaller than you think you need.

Shop Now

10 / 19
FH07JUN_479_55_010-1
Family Handyman

Sand Between Coats

No matter how careful you are, you can usually find ridges or bubbles or a few bits of dust and lint in a fresh coat of paint or primer. For the smoothest possible topcoat, hand-sand the entire door after the primer and between coats of paint. It may seem like a lot of work, but it shouldn’t take more than five minutes when the door is flat on the sawhorses.

Sand with non-clogging 180- or 220-grit sandpaper or sanding sponges (look for “non-clogging” or “stearated” on the label). Sand just enough to make the surface feel smooth. After sanding, vacuum and wipe down the door with a damp cloth to remove all the dust.

Shop Now

11 / 19
paint roller cover
Family Handyman

Take a Wool-Blend Roller Cover for a Spin

The most important part of your paint rolling setup is the roller cover, also known as a sleeve. It’s tempting to buy the cheapest cover available and throw it away when you’re done. But you won’t mind the few extra minutes of cleanup time once you experience the difference a good roller cover makes. Cheap roller covers don’t hold enough paint to do a good job. It’ll take you four times as long to paint a room. And you’ll likely end up with an inconsistent layer of paint, lap marks and built-up ridges of paint. Instead, buy a 1/2-in. nap wool blend roller cover and give it a try. With proper care, this may be the last roller cover you’ll ever buy.

Wool covers do have a few drawbacks, though. They tend to shed fibers when they’re first used. To minimize shedding, wrap the new roller cover with masking tape and peel it off to remove loose fibers. Repeat this a few times. Wool covers also tend to become matted down if you apply too much pressure while painting. Rolling demands a light touch. No matter what roller cover you’re using, always let the paint do the work. Keep the roller cover loaded with paint, and use only enough pressure to release and spread the paint. Pushing on the roller to squeeze out the last drop of paint will only cause problems.

Shop Now

12 / 19
FH16JUN_PAINTS_07_08
Family Handyman

Slap It On, Then Smooth It Out

When painting trim or other woodwork with a brush, I’ve found it’s best to load my brush with paint and then lay it on heavily in small sections using short, quick strokes — just to get enough paint on the trim to work with. Then I blend the paint into the section I painted before and smooth it all out using long finishing strokes in one direction.

13 / 19
FH16JUN_PAINTS_09
Family Handyman

Brush Bristle Saver

Without something to hold them in place, paint brush bristles will curl or splay as they dry. The best way to store them is in the cardboard wrappers that they came in. They’re not just packaging; they maintain the shape of the bristles as the brush dries after cleaning. If you’ve already thrown your brush wrappers away, use paper and a rubber band instead.

14 / 19
Family Handyman

Cardboard Protects Floors Best

Some painters don’t like drop cloths. They can be too big, slippery, clumsy and just downright messy, especially when you need to move them around while they’re still covered in wet paint. That’s why some prefer cardboard, setting it tight to the wall and sliding it with their foot as the work their way around the room.

15 / 19
FH16JUN_PAINTS_11
Family Handyman

No-Maintenance Paint Tray

Don’t bother putting liners in or cleaning your paint trays. Just pour any excess paint back into the can and let the paint in the tray dry completely before using it again. Paint trays with a 1/8-in.-thick paint buildup in them are better for this than clean trays because they’re a little heavier and don’t slide around when you’re loading the roller.

Shop Now

16 / 19
FH16JUN_PAINTS_12
Family Handyman

2/3 Prep, 1/3 Painting

A good prep job often takes more time than painting, but it pays off. The more time you spend prepping a room for new paint, the better your finished paint job will look. Washing, patching, sanding and vacuuming walls, ceilings, trim and doors before you pick up a brush or roller are time well spent. If you don’t take care of small imperfections now, they’ll stick out like a sore thumb once the paint goes on.

17 / 19
FH16JUN_PAINTS_13
Family Handyman

Do the Ceiling, Then the Walls

Before painting any walls, take a good look at your ceiling. If you think it needs refreshing, paint it first. You don’t want to paint the walls and then — in a couple of weeks or years — paint the ceiling. Rolling the ceiling drops a fine mist of paint onto everything below. Painting the ceiling first also allows you to be less fussy along walls. Any paint that gets slopped onto walls will get covered up later when you paint them.

18 / 19
FH16JUN_PAINTS_14
Family Handyman

Skip Brush Cleaning Between Coats

Whenever you take a break from painting or if you’re done for the day, toss your brushes into a five-gallon bucket of clean water to keep them from drying out (make sure all the brushes have the same color paint on them). When you’re ready to start painting again, swish the brushes around in the water and spin the excess out with a paintbrush-and-roller spinner. Do the spinning inside a second empty bucket to protect surrounding walls from flying water drops.

Shop Now

19 / 19
FH16JUN_EGGCEL_01
Family Handyman

Repurposed Egg Crates

Whenever you need to paint something small like a picture frame and need to raise it off the table to paint the edges, break out these handy egg cartons. Just cut a couple in half and use them to support the frame’s edges. You can reuse them several times or just throw them away when you’re done.

Also, if you’re curious about answers to unique paint questions like: What is paint made of? , Does paint expire?, Does storing paint cans upside down actually work? How to paint leather furniture? Can you use exterior paint inside? or Can you paint on metal with acrylic? then look no further because we got you covered!

Next: Explore these painting safety tips.