Sacrificial Miter Saw Fence for Safety
You can fix a common miter saw problem (and safety hazard) with some thin plywood and a scrap board.
Magnetic Fence for Drill Press or Band Saw
Pick up a Shop-Mag and use it as a fence for repeated accuracy on your drill press or band saw.
Magnetic Band Saw Fence
An 18-in. magnetic tool holder holds firm for accurate cuts and tiny fence-to-blade adjustments are made with the tap of...
How to Cut Narrow Strips on a Table Saw
Do you need to cut several narrow strips of the same size? It's easy to do on a table saw,...
How to Wax Your Table Saw Top
Keep your table saw shipshape with a good cleaning and a coat of paste wax. Travis explains how to do...
Never Use Just the Table Saw Fence to Crosscut Boards!
Why is it unsafe to only use the fence as a guide for making crosscuts on a table saw? Check...
Fine-Tuning with a Miter Saw
When ﬁne-tuning the length of boards with a miter saw, it helps to stick double-faced tape on the fence to...
Snap-On Fence for Band Saw and Drill Press
With a single one-handed bar clamp and a maple board (4 in. wide x 1-3/4 in. thick), you may have
How to Use a Table Saw: Cross Cutting
An accurate miter gauge and fence and basic wood jigs are the key to perfect table saw cuts.