Winter Preparedness: Handy Household Tips for Weathering the Winter
With a bit of planning and preparation ahead of winter's fury, you'll be safer, warmer and downright cozier!
Build a Mitten and Shoe Dryer
Carbon Monoxide Season
Ax Handle Armor
Splitting firewood is tough on ax and maul handles, especially near the head where near misses leave the handle gouged and splintered. To protect the handle, wrap it tightly with 18-gauge wire, then cover the wire with duct tape. And if your ax handle needs to be repaired, here's how to fix it.
Behind the Door Storage: Closet Glove Rack
Wet Boot Storage
Fast, Inexpensive Table
Switch to Winter Wiper Blades
It's snowing hard and you turn on the wipers. The blade supports get packed with snow and the wiper blade either causes streaks or misses large swaths of your windshield. Regular blades often become clogged with snow and ice. The rubber covering on winter blades prevents that problem. The entire blade is wrapped in a rubber boot that prevents ice and snow from sticking or packing. They make for much better visibility and safer winter driving. Here's how to replace your wiper blades.
Install Quilted Curtains to Block Drafts
If you're turning up the heat in the house to compensate for drafty windows, consider quilted curtains, which can increase your comfort and let you keep the temp down. Here's why winter curtains are great for insulating your home. The curtains are available in various colors, patterns and sizes. Search for 'quilted curtain' online to find retailers. A curtain can be installed in less than 10 minutes on your existing curtain rod.
4 Critical Places to Lube Your Car Before Winter
When cold weather is right around the corner, that's the time to get your car ready for winter driving: lube locks, latches, hinges, window channels and weather stripping. Proper lube can prevent binding and freezing and save you the cost of a busted regulator. You can lube your entire vehicle in less than 20 minutes. All you need is dry Teflon spray, spray lithium grease, a rag and glass cleaner.
Start with the window channels. Lower the window glass and shoot dry Teflon spray down the front, rear and top window channels on each door. Soak the channels. Then run the window up and down several times to spread the lube. Finally, raise the window and clean off overspray with glass cleaner.
Then shoot the door and trunk/hatch lock cylinders. Use the spray straw to force the lock 'door' open. Then inject a quick shot of dry Teflon spray into the lock cylinder. Insert your key and rotate the lock to spread the lube.
Next coat all the weather stripping with dry Teflon spray. Then spread it with a cloth. Finish the job by lubing the hood, trunk or tailgate latches with lithium grease. Then spray the door hinges. Operate the latches and doors several times to spread the grease.