98 Home Repairs You Don’t Need to Call a Pro For

You may think some home repairs are out of your league, but even beginner DIYers can handle many of these fixes—and save a lot of money in the process!

1 / 99
How to Replace a Toilet

How to Replace a Toilet

Whether you're replacing a toilet or removing the old one for a remodel and repairing it afterward so it doesn't leak, these DIY home improvement tips will help you do it faster and with fewer problems.
2 / 99
Refinish Your Own Hardwood
Family Handyman

Refinish Your Own Hardwood

Intimidated by this seemingly daunting project? Don't be. If you have the will and a whole day (or two) to yourself, you can refinish the hardwood floors in the major areas of your home. You don't necessarily need to sand, but if the floor is damaged enough to warrant buffing, check out your local hardware store and rent the equipment for anywhere from 4-48 hours. Here's how to refinish your hardwood floors.
3 / 99
Fix a Patchy Lawn
Family Handyman

Fix a Patchy Lawn

Achieving a lush lawn doesn't have to be a constant struggle. And you don't have to pay big bucks for a lawn service to douse your yard with chemicals, either. Growing healthy, green grass is mainly just a matter of knowing what to give your lawn, and when to give it. We'll teach you how to repair a patchy lawn.
4 / 99
Garbage Disposal Repair
Family Handyman

Garbage Disposal Repair

A garbage disposal is a bit scary when it's turned on and the blades are noisily chopping up kitchen waste. But, if your disposal gets stinky, fear not. It's easy to clean out the gunk and get rid of the smell. If the splash guard needs replacing, you can do that in 20 minutes! If you need to replace the entire disposal you can replace it yourself.
5 / 99
FH10NOV_513_05_026 clean the dishwasher
Family Handyman

Fix a Smelly Dishwasher

Stop bad dishwasher odors by cleaning food scraps from the tub and running a dishwasher cleaner through a cycle. Fixing a smelly dishwasher is a fairly simple DIY home improvement.

6 / 99
Fix Loud Cabinet Doors

Fix Loud Cabinet Doors

Tired of listening to those cabinet doors bang shut? Peel-and-stick door and drawer bumpers are the solution for loud kitchen cabinets. Get a pack of 20 at a home center for a few dollars or online at Amazon. Make sure the back of the door is clean so the bumpers will stick, then place one at the top corner and another at the bottom.
7 / 99
How to Replace Auto Lights

How to Replace Auto Lights

The auto light bulbs that burn out most often are the taillight, stop, turn signal, backup and headlight bulbs. But there are many other bulbs in a vehicle that could use your attention, too. Here, we'll show you how to replace automotive light bulbs that often burn out and can affect your driving experience.
8 / 99
Foam a Loose Showerhead
Family Handyman

Foam a Loose Showerhead

Here's an easy home fix that can be used beyond the bathroom. Fix a wobbly showerhead, or any wobbly pipe, with a few squirts of expanding foam. The foam encases the pipe in the wall and locks it into place, eliminating the wobble, so your showerhead will work like new. Can you think of an easier home fix?
9 / 99
How to Cover Up a Ceiling Stain
Family Handyman

How to Cover Up a Ceiling Stain

Hide tough ceiling water stains with a spray-on product called Upshot by KILZ. It's blended to match an aged ceiling and even has a vertical spray tip, which makes installation a breeze. Lay a drop cloth on the floor and tape plastic on the walls before you spray.
10 / 99
How to Get Dents Out of Wood

How to Get Dents Out of Wood

Dents in wood surfaces can be annoying. But fret not, they can be fixed! All you need to get dents out of wood is a damp cloth and an iron.
11 / 99
FH07DJA_474_05_042_1200x1200 Understand Electrical circuit breaker box

Circuit Breakers

It is not uncommon for power switches and breakers to be accidentally turned off when other appliances are being installed. Homeowners are encouraged to check their circuit breaker to make sure the issue isn’t as simple as needing to turn a switch back on. A circuit breaker is typically located in the garage, although in some homes, the circuit breaker can be found in the basement, hallway or storage room.

12 / 99
Weatherstripping is Easy
Family Handyman

Weatherstripping is Easy

If you can see light creeping beneath exterior doors, air is also escaping. Grab a few packages of self-adhesive rubber foam weatherstripping and go to town, sealing any and all doors that lead outside. Weatherstripping already installed but you're still suffering from a high gas bill? It might be time to replace the strips installed by the previous owners. Fortunately, it's easy to install weatherstripping yourself.
13 / 99
How to Unclog Clogged Drains
Family Handyman

How to Unclog Clogged Drains

Most clogged drains are caused by hair or greasy grime and you can clear them out yourself. Skip the chemical drain cleaner and grab a plunger to clear the clog and save on a service call. Even serious drain clogs in the distant reaches of your plumbing can be fixed without a pro. Learning how to prevent drain clogs in the first place is also a valuable DIY skill.
14 / 99
Family Handyman

Sanding Stainless Steel Appliances

Sanding stainless steel appliances with fine sandpaper and rubbing compound buffs out ugly scratches in your shiny stainless steel.

15 / 99
How to Touch Up Chipped Auto Paint
Family Handyman

How to Touch Up Chipped Auto Paint

If you don't cover paint chips with touch up paint, they'll rust and then you'll have a much bigger problem on your hands. Repairing chipped car paint is easy. Just buy touch up paint, fine tip paint applicators and wax and grease remover from any auto parts store. Clean the chip with the wax and grease remover and let it dry. Then dip the applicator in the paint and dab it onto the chip. Don't add too much or the paint will drip. Let it dry completely and apply wax after 30 days finish your car paint touch-up.
16 / 99
Gulf Wax for Sticky Drawers
Family Handyman

Gulf Wax for Sticky Drawers

Gulf Wax, a household paraffin wax commonly used for making candles and canning food, works wonders for smoothing a sticky wooden drawer. Simply rub the block of wax along the wooden drawer slides and any other points of friction on the drawer. Then replace the drawer and you'll feel a significant difference in its operation!
17 / 99
Solution for a Small Leak
Family Handyman

Solution for a Small Leak

Some roof leaks are tough to locate. Sometimes the water shows up at a ceiling spot distant from the leak. If your ceiling has a plastic vapor barrier between the drywall and the attic insulation, push the insulation aside and look for flow stains on the plastic. Often water runs to openings in the vapor barrier, such as at ceiling light fixtures.

If you can't see any telltale flow marks, and since the stain is fairly small, look at the underside of the roof for 'shiners.' A shiner is a nail that missed the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. Moisture that escapes into the cold attic from the rooms below often condenses on cold nails. Sometimes you can spot this if you climb up into your attic on a cold night. The nails will look white because they're frosted. When the attic heats up a bit during the day, the frost melts and drips, then the nails frost up at night again and so on. The solution is to simply clip the nail with a side-cutting pliers.

18 / 99
Fix a Loose Cabinet Knob

Fix a Loose Cabinet Knob

Any handle or knob that comes loose once is likely to come loose again. Put a permanent stop to this problem with a tiny drop of thread adhesive like Thread Lok. Don't worry; if you want to replace your cabinet hardware sometime in the future, the knobs will still come off with a screwdriver.
19 / 99
Fix a Wallpaper Seam
Family Handyman

Fix a Wallpaper Seam

If you have a wallpaper seam that's coming apart, reactivate the paste around the gap with a rag soaked in warm water. Hold the rag over the area for a minute or two, and then carefully open the gap a little larger so you'll have more room for the sealer. Squeeze seam sealer (white glue works in a pinch) into the gap, and press the paper to the wall with a roller. Clean off the excess sealer with a sponge.
20 / 99
Straighten a Bent Blind
Family Handyman

Straighten a Bent Blind

Unmangle mangled mini-blinds with a mini-blind slat straightener. Just slide it over the damaged slat and squeeze. The product, called the MiniBlindRx, works on 1-in. metal slats and is available for about $10.
21 / 99
Fix Scratched Cabinetry

Fix Scratched Cabinetry

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!
22 / 99
Hot Glue Gun Uses: Fix Wobbly Furniture with a Penny

Hot Glue Gun Uses: Fix Wobbly Furniture with a Penny

You can fix a wobbly bench or table with your pocket change. Add a drop of hot glue to a coin and attach it to the problem area. The coin will act like a shim, leveling out the furniture piece.
23 / 99
Replace Engine Air Filter
Family Handyman

Replace Engine Air Filter

Inspect and replace your engine air filter. Just unscrew or unclip the air filter box retainers and remove the old filter. Then check the filter to see how much light passes through by holding a shop light behind it. If the filter blocks 50 percent of more of the light, replace the filter. If not, put it back in, secure the air filter box cover and keep driving. It's one of the easier things you can do to fix up cars.
24 / 99

Fix a Smelly Washing Machine

Stop bad odors in your clothes washer by running a cycle with a special mold-killing tablet and by leaving the door open to promote drying. Regular cleaning is the quickest way to fix a smelly washing machine.

25 / 99
Repairing Decks
Family Handyman

Repairing Decks

Many things can go wrong with a deck. Missing screws, warped boards, squeaky nails, wobbly railings, fortunately, many of these problems are well within the scope of the average DIYer. Inspect your deck for seven common deck problems and then repair whatever needs fixing.
26 / 99
Repairing Walls
Family Handyman

Repairing Walls

Drywall is everywhere and it is surprisingly easy to damage. The good news is that the average drywall ding or hole can be easily patched. It's also easy to repair cracks in drywall. Got popped drywall nails or screws? You can fix those, too!
27 / 99
Fast-Setting Drywall Compound
Family Handyman

Fast-Setting Drywall Compound

Quick-setting drywall compound lets you finish small repairs and fill deep holes in minutes instead of waiting days for premixed joint compound to dry. The small boxes are available in most home centers and paint stores are also easier to store and more likely to get used up than large bags or buckets. It'll help you hang drywall and repair it like a pro.
28 / 99
Feed the Lawn
Family Handyman

Feed the Lawn

If your yard is mostly grass with just a few weeds, forgo the expensive landscaper. Use lawn fertilizer or weed and feed yourself. With one trip to your local hardware store or plant nursery, you can purchase $25-$50 worth of supplies, spend just a few hours on your lawn, and simply wait for the grass to grow.
29 / 99
shutterstock_99673421 rechargeable batteries
VLADY SLAV DANILIN/Shutterstock

Check the Batteries

There are a number of contributing factors such as blocked vents that can constrict air flow or lead to irreversible damages. But the problem might be as simple as changing your batteries. If the thermostat is not lit, it is time to change the batteries!

30 / 99
Appliance Touch-Up Paint
Family Handyman

Appliance Touch-Up Paint

A single scratch or chip can make a beautiful new appliance look like something you found out in the alley. Fortunately, you can make those eyesores, even up to 1/4-in. diameter, almost completely vanish with color-matched epoxy touch-up paint.
31 / 99
Repairing and Replacing Doors
Family Handyman

Repairing and Replacing Doors

A variety of problems can befall your home's doors, especially older doors that may start to sag, stick, develop drafts or experience other issues. Fixing or replacing a door is well within the capabilities of most homeowners, especially if you have a partner to help out. From installing new weather stripping to replacing the lock, you can handle it.
32 / 99
Lubricate a Lock with a Pencil

Lubricate a Lock with a Pencil

Don't give up on a sticky lock, you can fix it with a pencil! Simply rub the teeth of your key with the pencil, coating it generously with graphite. Insert the key in the lock, which will deposit the lubricant inside. Repeat as needed until the key glides in smoothly.
33 / 99
Use Car Wax in Your Kitchen
Family Handyman

Use Car Wax in Your Kitchen

If you own stainless steel kitchen appliances, you may want to consider using car wax to clean them rather than a surface cleaner. This handy hint will help your kitchen appliances resist fingerprints and smudges.
34 / 99
Fix Leaking Plumbing Pipes

Fix Leaking Plumbing Pipes

There are simple ways to find and stop common water leaks before they cause rot and other expensive damage. You'll find most of these leaks around bathtubs and showers, drains, sinks and toilets. Finding and repairing plumbing leaks can be tricky, but it's possible to DIY.
35 / 99
Fix Sticking Drawers

Fix Sticking Drawers

A few minutes of cleaning and lubricating can make drawer slides glide almost like new. Start by removing the drawers so you can inspect the slides. Wipe the tracks clean and coat them with a light spray lubricant. Also lubricate the rollers and make sure they spin easily.
36 / 99
Fix a Broken Light Fixture

Fix a Broken Light Fixture

Replacing a light fixture is one of those DIY jobs that's theoretically quick and simple, but often becomes a three-hour series of problems. We talked with two of our master electricians. They've seen all of those frustrations and offered these tips to help DIYers through the job quicker and safer.
37 / 99
Fixing a Chair
Family Handyman

Fixing a Chair

This easy home fix is one you'll definitely want to keep handy! Trying to keep a rickety old chair together without going through the trouble of taking it apart and regluing it? The simple fix for a wobbly chair is to just drill pilot holes and drive trim-head screws through the bottom of the rungs and into the legs.
38 / 99
Unclog a Toilet With Dish Soap
Family Handyman

Unclog a Toilet With Dish Soap

If the toilet plunger doesn't seem to be doing the trick, try this solution before you reach for the snake. Squirt about 1/2 cup of liquid soap in and let it sit for a while. The liquid soap reduces friction and will often allow the contents of the bowl to slide on through.
39 / 99
Stripped Screws? No Problem
Family Handyman

Stripped Screws? No Problem

A stripped screw can turn a 10-minute fix into a two-hour nightmare. One of the best investments a DIYer can make is a screw extraction kit. It comes with three different size bits and costs about $20. One side of the extractor bit reams a hole into the screw, and the other side has reverse threads that dig into the screw as you turn it out.
40 / 99
Stain Markers
Family Handyman

Stain Markers

Natural or stained woodwork is beautiful, but scratches can really stand out, especially with darker stains. You can make these scratches disappear by touching them up with a stain marker. It's simple to use, and much cheaper than buying whole cans of stain.
41 / 99
Spark Plugs
Family Handyman

Spark Plugs

As long as you purchase the right replacements, you can replace spark plugs in your car or lawn mower.
42 / 99
HVAC
Family Handyman

HVAC

Annual maintenance wards off many HVAC problems. If you do have a failure, you can usually fix it yourself. If your AC unit is working but has become noisy, you can fix that, too! If it's your furnace that needs attention, you can perform routine maintenance, and handle simple repairs yourself. Plus: Learn how to choose furnace filters and how to replace furnace filters yourself.
43 / 99
A Quick Coat of Paint
Family Handyman

A Quick Coat of Paint

Almost nothing is quicker, easier or refreshes a room more than a new coat of paint. Even switching up a bright white for a trendy, bright grey can change your whole perspective and give you a starting point for new colors and decoration. Gallons of paint range from $30-$50, and with primer/paint combinations, you will likely only need a gallon or less to finish an average sized room. Add another $10, and you'll be set with rollers, paint brushes, and painter's tape. This painting a room yourself could potentially save you thousands over the cost of a professional painter.
44 / 99
stove temp

Diagnosing Appliance Fault Codes

When the display panel on your appliance flashes strange numbers, grab your owner’s manual. It may be flashing a fault code that’ll help diagnose a problem.

45 / 99
Repair and Reglaze Windows
Family Handyman

Repair and Reglaze Windows

Instead of forking over $5,000-10,000 to replace all of your old windows with brand new ones, consider repairing old windows yourself. With a few hundred dollars in supplies (sand paper, paint, window glaze, etc.), you'll be prepared to reglaze every window in your house. Though it can be a tad time consuming, you can prioritize the project by room, removing windows one by one to paint, reglaze, and, if necessary, replace any cracked glass.
46 / 99
Fix Faucets
Family Handyman

Fix Faucets

A leaky or malfunctioning faucet can be fixed or replaced by even a novice DIYer. You can take your faucet apart and clean it out, or if worse comes to worse, replace it entirely in the space of a couple of hours.
47 / 99
Insulation is Key
David Papazian/Shutterstock

Insulation is Key

Though it can seem intimidating, installing your own batting installation can be easy, and take just a few hours if you isolate the need to a few key spaces. Have a drafty attic? Start there. Concerned about a freezing crawl space? Throw on your work jeans and get to work. These insulating spaces will instantly feel warmer and you'll notice the savings on your next heating bill.
48 / 99
How to Remove Sticker Residue

How to Remove Sticker Residue

Reach for cooking oil next time you want to remove annoying sticker residue. Dab any type of kitchen cooking oil (olive, canola or sunflower) onto a paper towel. Then lay the paper towel over the residue that refuses to budge. Wait a few minutes while the oil works to dissolve the stubborn glue. Finally, remove the towel and rub away the sticker residue with another clean paper towel. However, you need to be cautious with stains on more absorbent materials.
49 / 99
Fix Holes in Siding
Family Handyman

Fix Holes in Siding

Nail holes in aluminum and vinyl siding are tough to repair without replacing the entire piece, but a squirt of color-matched caulk from a siding supplier will solve the problem for a lot less money and aggravation.
50 / 99
Fix a Broken Drawer

Fix a Broken Drawer

Don't put up with a broken corner joint on a drawer. Fix it before the whole drawer comes apart. Remove the drawer and then remove the drawer front from the drawer box if possible. Most fronts are fastened by a couple of screws inside the box. Remove nails, staples or screws from the loose joint and scrape away old glue with a utility knife.
51 / 99
Fix a Shutoff Valve
Family Handyman

Fix a Shutoff Valve

There's nothing worse than starting a sink or toilet repair only to find that the shutoff valve won't shut off. Some shutoff valves are easy to replace. For those that aren't, turn off the main water valve, remove the packing nut, and then unscrew the stem and take it to the hardware store to find a replacement washer. Clean any grit out of the valve body and pop on the new washer. The valve will work like new.
52 / 99
Bleach Away a Water Stain
Family Handyman

Bleach Away a Water Stain

Before you go through the trouble of repainting a ceiling to get rid of a water stain, try this easy home fix. Spray the spot with a bleach and water solution (10 percent bleach), and wait a day or two. If it's an old stain, use a mold and mildew remover from the grocery store. You'd be surprised how often the stain disappears by the next day. It works on both flat and textured ceilings. Wear safety goggles, and make sure you protect the walls and floors with plastic.
53 / 99
Clean Upholstery with Baking Soda
Family Handyman

Clean Upholstery with Baking Soda

Did you know that regular ol' baking soda can help to remove odors from a couch or upholstered chair? Just sprinkle a generous amount onto the fabric, wait about 20 minutes, and then vacuum it up. The baking soda helps to soak up odors and even break up some stains in the fabric.
54 / 99
Use Coins for Toilet Shims
Family Handyman

Use Coins for Toilet Shims

Did you know that coins can be used to shim a toilet? Just slip coins under a toilet to level it; then add caulk along the floor to hide the coin shims.
55 / 99
air conditioner
Family Handyman

Air Filter

It is instinctual for homeowners to contact an HVAC tech when they notice irregularities in their cooling or heating system. These irregularities could be a direct result of a dirty or clogged air filter. We encourage homeowners to check their filters and replace if necessary. It’s also beneficial for homeowners with pets, carpet, or for homes near fields or construction zones to have multiple filters for convenient replacement.

Pro Tip: Mark your calendars! 1-in. filters should be changed every month, 2-in. filters should be changed every 2 months and 4 to 5-in. filters should be changed every 6 to 12 months.

56 / 99
Caulk it!
Family Handyman

Caulk it!

It's fun, it's easy, it's caulking. Dirt or mold creeping underneath the clear caulk in your tub? Cut it out and re-caulk. Gaps in old moulding got you down? Add white caulk for a smooth finish. Cheap and easy, there's no reason you shouldn't be doing this yourself.
57 / 99
Cleaning Solvents
Family Handyman

Cleaning Solvents

Remove stickers, tar, gum, dried paint drops, grease and a host of other unwanted substances quickly and without a lot of frustrating scrubbing by using a general-purpose cleaning solvent. They're a little stinky, but they make short work of nasty, gummy messes like adhesive residue from price tags. Goo Gone will clean up sticky messes in no time..
58 / 99
Car Tires
Family Handyman

Car Tires

With a little help, most car owners can handle car tire maintenance themselves. You can measure the tread to determine if your tires need replacement, check tire pressure, fix a leaking tire stem valve and even change a flat tire.
59 / 99
Repair Any Holes
Family Handyman

Repair Any Holes

So a door knob slammed through the wall after one too many times slamming the door. No need to call your handy contractor. You can easily fix a few holes in your drywall by injecting a setting compound (for smaller holes) or by cutting out the damaged sections and replacing them with new drywall (for larger ones).
60 / 99
Kitchen with metallic fridge
BREADMAKER/SHUTTERSTOCK

Fix a Broken Refrigerator

Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can repair the refrigerator yourself, save some money and avoid the expense and inconvenience of a service appointment.

61 / 99

Fix Tears in Leather and Vinyl
Family Handyman

Fix Tears in Leather and Vinyl

Upholstery shops charge almost $200 to fix tears in your seats. You can do it yourself in a few hours with a vinyl and leather repair kit (less than $20) from any auto parts store. You'll have to practice a bit to get the right color mix and it might not be a perfect match when you're done, but it's a heck of a lot better than driving around with torn seats. Start by gluing reinforcing fabric onto the underside of the torn vinyl or leather. Then mix the heat-set filler to match your fabric color and apply it to the tear. Next, find a textured mat that most closely resembles the texture of your vinyl or leather and place it onto the liquid filler. Heat the patching tool with a clothes iron and press it onto the textured mat. Remove the patching tool, but leave the textured mat in place until the patch cools. Then peel it off. Learn more about the step by step process of leather repair.
62 / 99
Remove Hard-Water Buildup with a Lemon

Remove Hard-Water Buildup with a Lemon

Remove hard-water buildup on your faucet with this simple, natural solution: Place half of a fresh lemon on the end of the faucet, wrap a small plastic bag around the lemon and secure it to the faucet with a rubber band. After a few hours, remove the lemon and wipe the faucet clean.
63 / 99
Fix Small Holes
Family Handyman

Fix Small Holes

Tiny holes in shingles are sneaky because they can cause rot, a leaky roof and other damage for years before you notice the obvious signs of a leak. You might find holes left over from a satellite dish or antenna mounting brackets or just about anything. And exposed, misplaced roofing repair nails should be pulled and the holes patched. Small holes are simple to fix, but the fix isn't to inject caulk in the hole. You'll fix this leaky roof problem with flashing. Liquid flashing helps you seal recessed windows.
64 / 99
Fix Cracked Grout

Fix Cracked Grout

Cracking grout in a newly tiled floor is a real letdown after all the work you put into it. The causes could range from a poor grout mix to a lack of expansion joints, to movement of the tiled surface. Although it might ultimately be necessary to stiffen the floor, you can first try to fix cracking grout using caulk.
65 / 99
Fix Misaligned Cabinet Latches

Fix Misaligned Cabinet Latches

Most newer cabinets have self-closing hinges that hold the doors shut. Others have magnetic or roller catches. A catch that no longer keeps a door closed is either broken or out of adjustment. Catches are fastened with two screws, so replacing a damaged catch is simple. Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn't close tightly, try again.
66 / 99
Fix a Fluorescent Light Ballast

Fix a Fluorescent Light Ballast

When your fluorescent light flickers or makes a loud and annoying hum, a degrading ballast is the cause. You can fix or replace a fluorescent light ballast yourself.
67 / 99
Texture Spray Cans
Family Handyman

Texture Spray Cans

Sooner or later, every sprayed ceiling is going to get a water stain or a scrape. Spray texture in a can won't perfectly match every ceiling texture, but it's usually close, and a lot easier than respraying a whole ceiling. Before spraying ceiling texture, seal the patch with a stain-blocking primer, cover the floor and furniture, and practice your technique on scrap plywood or cardboard.
68 / 99
Repair Gutters
Family Handyman

Repair Gutters

Repair your gutters before overflowing water damages your home. If your home doesn't have gutters, you can install them yourself. Also, consider installing gutter guards.
69 / 99
Fix Windows
Family Handyman

Fix Windows

Obviously you can't glue broken glass back together. But, for windows that get stuck, let in drafts or have moisture issues, there are DIY solutions. Fix old windows, double-hung windows, window glass glazing and screens. You can also stop window drafts and learn how to avoid and remove window condensation. If you want to take on a larger task, you can even replace your windows!
70 / 99
Stain-Blocking Primer
Family Handyman

Stain-Blocking Primer

Water-based sealers do a good job most of the time, but for really tough problems like wood knots, yellowed water stains, heavy smoke damage, and other stains that bleed through paint, pigmented solvent-based sealers (BIN and KILZ are two brands) are unbeatable. Learn how to skim coat walls here. 
71 / 99
How to Restore Your Deck
Family Handyman

How to Restore Your Deck

After a few years, your deck is sure to show some wear and tear and make you feel like you have an ugly deck. Don't rush to replace boards that are otherwise in good condition. With a deck restoration coating and a few days in the sunshine, your deck will look as good as new. Get the full how-to here.
72 / 99
Fix a Twisted Key

Fix a Twisted Key

If you accidentally twist a key out of shape, try this temporary fix: Place the key in a vise with the damaged portion pointing upward. Then use pliers to slowly bend it straight. Check out our guide for the step-by-step tutorial. Be sure to replace the key soon, because once it’s bent, it's more likely to break.
73 / 99
Replace Drawer Slides

Replace Drawer Slides

If you find that drawer slides are bent, rollers are broken or rollers won't turn even after lubricating, replacement is the best solution. To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new. Remove a drawer track and a cabinet track and take them shopping with you. Learn how to build an under-cabinet drawer here.
74 / 99
Hide a Hole With a Smoke Detector
Family Handyman

Hide a Hole With a Smoke Detector

Short on time and money? Instead of patching a hole in the ceiling (which usually means repainting the whole ceiling) just cover it with a smoke detector. No more hole, and added safety, to boot!
75 / 99
Silence a Squeaky Floor
Family Handyman

Silence a Squeaky Floor

Another easy home fix to keep in your files: To fix a squeaky floor under carpet, locate the floor joists with a stud finder, then drive in a trim head screw through the carpet, pad and subfloor, and right into the floor joist. Be sure the top inch of the screw doesn't have threads or the subfloor won't suck down tight to the joist. We like trim screws because screws with larger heads pull down and pucker the carpet. If that happens, back out the screw and drive it back down. Keep adding screws until the squeak stops. Try these other squeaky floor fixes.
76 / 99
Upholstery
Family Handyman

Upholstery

Do you have a piece of upholstered furniture that has worn or torn fabric? Don't worry! You can replace the fabric with a design of your own choice. In fact, you may be able to make it better than ever! Plus: Fix a wobbly chair. And how to remove stains from wood furniture.
77 / 99
Two Lubricants That You Need in Your House
Family Handyman

Two Lubricants That You Need in Your House

Silicone dries quickly and invisibly and doesn't attract dirt, making it a good lubricant for drawer rollers, window tracks, door locks, bike parts, and other plastic, metal and rubber surfaces. It also helps protect metal against rust. Lithium grease is a long-lasting, weather-resistant (though somewhat messy) lubricant for garage door tracks, car doors and latches, and other metal parts that get heavy use outside. Check out 20 brilliant ways to use WD-40, another must-have lubricant for home repairs.
78 / 99
Ditch the Wood Paneling
Family Handyman

Ditch the Wood Paneling

This is a fun one. Composite wood paneling may have been all the rage in the 60s and 70s, but unless it's still in perfect condition and painted white, it's probably an eyesore. Popping off this decorative paneling can take minutes, and is seriously satisfying. Just be ready: you never know what condition the wall is in underneath. Be prepared to do a little plaster repair and, of course, repaint.
79 / 99
dryer fix
Family Handyman

Clothes Dryer Repair Guide

Most dryer problems can be fixed in an hour with a few basic tools and a continuity tester or multimeter, and you can do the work yourself with these simple instructions. Get the clothes dryer repair guide.

80 / 99
Wine Cork Wobbly Table Fix

Wine Cork Wobbly Table Fix

Next time you open a bottle of wine, save the cork! You can use a slice of synthetic cork to brace a wobbly table leg. Just mark the amount of cork needed, slice it off with a utility knife and glue it in place.
81 / 99
Fix Plumbing Vent Boots
Family Handyman

Fix Plumbing Vent Boots

Plumbing vent boots can be all plastic, plastic and metal, or even two-piece metal units. Check plastic bases for cracks and metal bases for broken seams. Then examine the rubber boot surrounding the pipe. That can be rotted away or torn, allowing water to work its way into the house along the pipe. With any of these problems, you should buy a new vent boot to replace the old one. But if the nails at the base are missing or pulled free and the boot is in good shape, replace them with the rubber-washered screws used for metal roofing systems. You'll find them at any home center with the rest of the screws. You'll have to work neighboring shingles free on both sides. If you don't have extra shingles, be careful when you remove shingles so they can be reused. Use a flat bar to separate the sealant between the layers. Then you'll be able to drive the flat bar under the nail heads to pop out the nails.

82 / 99
Stripped Screw Holes

Stripped Screw Holes

If a screw turns but doesn't tighten, the screw hole is stripped. Here's a quick remedy: Remove the screw and hardware. Dip toothpicks in glue, jam as many as you can into the hole and break them off. You don't have to wait for the glue to dry or drill new screw holes; just go ahead and reinstall the hardware by driving screws right into the toothpicks.
83 / 99
Restore Free Flow to a Faucet
Family Handyman

Restore Free Flow to a Faucet

When a kitchen or bathroom faucet loses pressure or starts spraying to the side, it's usually due to a dirty aerator screen. Luckily, cleaning a screen is an easy job. Start this fix by closing the drain plug (so you don't drop parts down the drain). Then remove the aerator using a rag or masking tape so you don't mar the finish with your pliers. To remove the sand and other deposits, soak the aerator in vinegar, then scrub it with a toothbrush. This usually solves the problem. If you have to disassemble the aerator to clean it, lay out the parts in the order you removed them so you can reassemble them correctly. Still having issues? Do a showerhead deep clean.
84 / 99
Fix a Running Toilet: Flush Without Hang-Ups
Family Handyman

Fix a Running Toilet: Flush Without Hang-Ups

Here's a quick way to avoid a running toilet caused by a kinked toilet chain. Remove the chain from the arm attachment, and slide a plastic straw over the flapper chain, covering about two-thirds of the chain. Then reattach the chain to the arm. It's that simple, and you'll never have a running toilet caused by a kinked chain again.
85 / 99
Family Handyman

How to Adjust Oven Temperatures

If your oven cooking times are off, recalibrate your oven temperature to match an accurate oven thermometer. The procedure is in your oven’s instruction manual. Learn how to adjust oven temperatures.

86 / 99
Epoxy Glue
Family Handyman

Epoxy Glue

Two-part epoxy glue is rock-hard, fills huge gaps, bonds to almost anything and dries very quickly. Some brands now come with an applicator tip that automatically mixes the two parts so you can spread it like a regular glue, without mixing. It's perfect for gluing irregular shapes and dissimilar materials to each other. Most epoxies set in five minutes, but you can buy quicker-setting types that allow you to just hold pieces in place for a minute, without any clamping. Pick up some epoxy glue on Amazon today.
87 / 99
Light Switches
Family Handyman

Light Switches

Don't automatically avoid a project just because it involves electricity: Replacing a standard light switch with a dimmer switch is a very doable DIY project, as is replacing a three-way switch.
88 / 99
FH14JUN_549_56_003 air conditioner vent
Family Handyman

Vents

Vents are a sensitive component of any cooling and heating system. It is imperative to check vents, ducts, and grills for blockage as that can be the leading factor of irregular air flow.

Pro Tip: Furniture or plants should be at least two feet away from vents.

89 / 99
The Miracle of a Walnut

The Miracle of a Walnut

Furniture gets beat up over time, but you don't have to live with the unsightly scratches. In fact, you can remove years of damage with a simple snack food: walnuts.
90 / 99
Keep Cabinet Doors Closed
Family Handyman

Keep Cabinet Doors Closed

Here's a 10-minute fix for a cabinet door that won't stay closed. Just install a magnetic door catch. Roller-style ones also work, but it's easier to line up a magnetic catch with the strike.
91 / 99
Caulk and Grout
Family Handyman

Caulk and Grout

Missing caulk around the bathtub or broken grout between tiles is an invitation for serious moisture damage. Fortunately, you can recaulk a bathtub or shower and regrout your wall tile without calling in a pro. Plus: Tips for caulking. Also check out grouting tips and techniques.
92 / 99
Two-Part Filler
Family Handyman

Two-Part Filler

Two-part filler has to be mixed and it doesn't rinse off with water, so it's not as user friendly as other fillers. However, it's much tougher and a much better choice for any hole bigger than a nail head, especially outdoors. And it's not just for wood?you can patch metal, fiberglass?even concrete. Here's another option for wood filler. Buy some wood filler on Amazon now.
93 / 99
outlet in kitchen
Family Handyman

Simple Fixes for Common Appliance Problems

At least a quarter of all appliance repair calls are resolved with no-brainer solutions like pushing a button or flipping a circuit breaker. Learn what to look for and how to avoid these expensive lessons. Learn all of the simple fixes for common appliance problems.

94 / 99
Reinforce a Drawer Front
Family Handyman

Reinforce a Drawer Front

Here's a quick home fix for a drawer front that's pulling off. Cut a couple of lengths of quarter-round the same height as the drawer sides. Hold them in place while you drill a couple of holes through the sides and front of the drawer box. Dab some polyurethane glue (wood glue doesn't stick well to finished surfaces) on the pieces of quarter-round before screwing them into place.
95 / 99
Toilets
Family Handyman

Toilets

Don't let your toilet be a mysterious device in the corner of your bathroom: Toilets actually operate by very simple mechanisms that are easy to understand. The majority of toilet issues—clogs, continuous running water, loud noises, etc.—can be solved with the quick purchase of a replacement part and some tinkering in the tank. Don't be afraid to open it up and take a look.
96 / 99
Family Handyman

Electric Stove Repair Tips

You can solve most electric range burner problems yourself and avoid the expensive service call. It’s quick and easy to replace a burner or bad burner socket. Read the electric stove repair tips.

97 / 99
Lube a Sticking Vinyl Window or Door
Family Handyman

Lube a Sticking Vinyl Window or Door

When vinyl windows and doors don't operate smoothly, it's usually because gunk has built up in the channels. But sometimes even clean windows and doors can bind. Try spraying dry PTFE spray lubricant on the contact points and wiping it off with a rag. Don't use oil lubricants for this home fix; they can attract dirt, and some can damage the vinyl. Make sure to keep your windows clean all year long with these pro tips.
98 / 99
How to Remove Carpet Yourself

How to Remove Carpet Yourself

Depending on where you live, an installer will charge $3 to $5 per square yard for tear-out. By removing the carpet from a 12 x 15-ft. room, you'll save $60 to $100 for an hour's work. Talk to your installer to find out exactly what you'll save by doing it yourself.
99 / 99
Fh Nho Listicle Web V2

If you’re enjoying this content, sign up for our new homeowner newsletter where we’ll guide you through the exciting journey of what to do before you purchase your dream house as well as give you expert tips and projects to help you make that new house a true home.