Create a slant rack between the studs
Photo 1: Rip a 2×4 diagonally to create the sides
Screw each wedge to the face of a stud. Install a plywood face and you’re ready to store stuff.
For the tall unit, use the bottom wall plate for the bottom of your box. Attach the plywood to create a 1-in. gap at the bottom for removing dirt or dropped items. For the shorter slant boxes, install your own blocking to create the bottom; leave a gap at the bottom of the plywood for those, too. We show 48-in. and 16-in. versions; you can make yours any depth or length you want.
Note: If your garage has a short ceiling (or your tools have extra-long handles), create a cutout in the top of the plywood face, as shown in Figure A, to allow more entrance and exit leeway for your tools.
Figure A: Garden Tool Rack
Use this diagram to assemble your slanted garden tool rack after cutting the pieces.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Circular saw
- Cordless drill
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 5 inch construction screws
- Plywood: ½ inch, 2x4