Longer-Lasting Light for Garage Door Openers
Standard lightbulbs can’t take much vibration, so they may not survive long in a garage door opener. The good news is, this LED was developed specifically for use in garage door openers. The bulb’s electronics are shielded to prevent receiver interference with the opener’s remote and the bulb is built to withstand vibration and low temperatures down to -22 degrees F. Plus, this bulb is rated for damp locations, unlike most LED’s. Genie claims the bulb has a 25,000-hour life span, which is equivalent to about 17 years of use!
If you’d like to do more than just replace your garage door opener lightbulb, this collection of DIY troubleshooting and repair tips will help you get started.
Epoxy Over Paint
Sheet Metal Magnet Board
Sheet metal or strips of galvanized flashing make great magnet boards in the workshop. Be sure to level the material on the wall and use self-tapping sheet metal screws to fasten it to studs.
Then put several magnets on the message board for hanging project plans, supply lists and even small metal tools such as a paint can opener or scissors. Above the workbench is a perfect place for mounting a magnet board. — Bill Jones