3-Step wall repair
Photo 1: Cut
Cut a V-notch through the full length of the crack, 1/8 to 1/4 in. deep, removing all loose wall material. Protect woodwork with masking tape.
Photo 2: Embed
Embed paper tape in joint compound using a 6-in. taping blade. To avoid trapping air bubbles under the tape, moisten the paper tape with water, lay it over the crack and squeeze excess compound and air from underneath with the blade. Apply an additional thin layer of compound and feather it off 2 in. on both sides of the tape. Let dry.
Photo 3: Apply
Apply a second (and third, if necessary) coat of compound, smoothing it out 6 to 7 in. on both sides of the joint. Smooth the compound to a thin, even coat using long, continuous strokes with a 12-in. taping blade. Allow the repair to dry thoroughly, sand it smooth (avoid exposing the tape) and paint it.
As homes settle, cracks may radiate from the corners of doors and windows. Whether your walls are made of plaster or drywall, you can repair the cracks in two steps over a day or two—and get the area ready to sand and paint. Use paper tape; it’s stronger than fiberglass tape for wall repairs. For cracks more than 1/4 in. deep, clean out the loose material and use a quick-setting crack filler like Durabond to build up the area level with the wall. Then use the steps shown in Photos 2 and 3 to fix it.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Dust mask
- Mud pan
- Painters tape
- Taping knife
- Utility knife
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Paper drywall tape
- Pre-mixed joint compound
- Setting type compound