Save on Pinterest

How to Use a Drywall Circle Cutter

This slick tool does a great job

FH03MAR_CIRCUT_01-2Family Handyman
Cut clean round holes in drywall for electrical boxes and light fixtures with this circle cutter. It's quick and easy, and only takes seconds

You might also like: TBD

Time
Instant!
Complexity
Simple
Cost
Under $20

A simple way to cut holes in drywall

Circle cutter in action

Mark the circle center point, embed the center point and rotate the tool to score the drywall. Then knock out the circle.

Close-up of circle cutter

Two serrated wheels score the drywall deeply and evenly.

Drywall circle cutters have been around a long time. But try using one and you'll find they're awkward and clumsy, because they only have one smooth wheel and take both hands to operate. You need one hand to pivot and the other hand to press the wheel through the paper to make the score.

This new circle cutter (from Goldblatt) has two sharp serrated wheels that you pivot around a sharp center tip. The cutter evenly scores the drywall paper surface so you can knock out the plug. It's worth picking one up if you have to cut lots of circles (for recessed lights or round electrical boxes). It is available at most stores that have a good selection of specialty drywall tools.

Required Tools for this Project

Drywall circle cutter

Popular How-To Videos