Remove the pin
Photo 1: Tap pin up
Loosen each hinge pin by tapping an 8d nail up from underneath. Once the pin is loose, pull it out (lift up on the door handle to relieve pressure if the pin binds). Keep the door closed and work on only one hinge at a time.
Photo 2: Lubricate
Lightly coat the hinge pin with petroleum jelly and dab a little in the top of the pin slot. Reinsert the pin and wipe off any excess.
If you’ve got a door hinge that squeals every time you open the door, we’ve got the fix for you! A little petroleum jelly will rid the hinge of that annoying wail. The petroleum jelly works its way into the hinge and adheres well, so it won’t run off and make a mess like oil or other lubricants.
Photos 1 and 2 show how to punch out a hinge pin and grease it up. After all the hinges have been lubricated, open and close the door a few times to work the petroleum jelly into the hinge joints.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Hammer
- Rags
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 8d finish nail
- Petroleum jelly
