The 55 Most Brilliant PVC Hacks You’ve Ever Seen

Updated: Mar. 13, 2024

What can’t you do with PVC pipe? Here are 56 incredibly smart (and cheap!) ways to use this do-it-all material around your home and workshop.

1 / 56

Family Handyman

Drill Dock

Keep your drills and those must-have drill attachments organized and close at hand to make your DIY projects run smoothly. By investing just two hours, you can build this wall-mounted drill dock to house everything you need. There’s a top shelf for accessories, a wider lower shelf for larger items such as battery packs, and the clever use of 3-inch PVC piping makes hanging holsters for different drill attachments.

The instructions for this drill dock include advice on how to customize the dock to fit your drill and you can even add a power strip to the bottom shelf to keep everything charged and ready to go. In addition to basic tools, you’ll need a circular saw, a jigsaw, and a clamp to complete this project successfully.

2 / 56

Move Heavy Objects

You’d be amazed how easy it is to move heavy, awkward objects with three pieces of PVC pipe. Move playhouses, yard sheds, empty hot tubs and rocks weighing well over a ton with this trick. Use 4-in.-diameter ‘Schedule 40’ PVC, which is available from home centers. Here’s how to do it:

Lift the front edge of the stone with a pry bar and slip two pipes underneath. Place one near the front and one about midway so the stone rests on the pipes.
Position the third pipe a foot or two in front of the stone.
Roll the stone forward onto the third pipe until the rear pipe comes free. Then move the rear pipe to the front and repeat.

This technique works best on relatively flat ground.

3 / 56

4 / 56

Family Handyman

PVC Knife Holders

Carrying kitchen knives safely for picnics and camping trips is challenging. So one reader made knife containers out of 2 pvc pipes and caps. He glued the cap on one end and marked the unglued cap with an 'X.' That way he always knows which end to open. We think this is one of the most brilliant camping storage ideas ever!

Editor’s Tip: PVC is affordable and versatile for home plumbing, but some health advocates warn against it. Here’s to know whether PVC pipes are safe or not.

5 / 56

Family Handyman

Make a Mattress Sling

Trying to wrestle a heavy, floppy mattress anywhere is tough. Many mattresses have handles, but they're not intended for carrying. They're actually made to help you position the mattress, so they're not very strong. Here's an easier way to carry a mattress: Make a simple rope sling that will give you and your helper a lot more control. Thread the rope through the mattress handles. Slip a 5-in. piece of 1-in. PVC pipe over the rope ends and then loop and tie each end to create a comfortable sling grip. Flip the mattress over so the sling is on the bottom and you're on your way.

6 / 56

Family Handyman

Fishing Rod Organizer

We got sick and tired of our fishing rods getting tangled, so we came up with this easy fishing rod organizer. All you need is a length of 3-in.-diameter PVC pipe and a foam swimming pool noodle for this DIY garage storage system. Drill 1-in. holes spaced every 4 in. in the PVC pipe. Use a utility knife to cut slits in the foam noodle, spacing them 4 in. apart. Line up the pool noodle on the wall so that at least two of the slits sit over studs. Pull those slits apart, slide in a fender washer, and screw the noodle to the wall with 2-in. screws. Then screw the PVC pipe to the wall beneath it at a comfortable height and insert your fishing rods. Look Ma, no more tangles! Want some more DIY garage organization ideas? Check out 27 Easy Ways to Organize Your Garage

7 / 56

Storage Pockets for Skinny Things

Saw off short pieces of 1-1/2-, 2- or 3-in. PVC plumbing pipe with 45-degree angles on one end. Screw them to a board to hold paint brushes, pencils, stir sticks and just about any other narrow paraphernalia in your shop. Mount them by drilling a 1/4-in. hole in the angled end, and then drive a 1-5/8-in. drywall screw through the hole into the board.

8 / 56

Vacuum Attachment Holder

Take one of your shop vacuum attachments to the home center and find a PVC tee that fits. Drill a hole in the tee large enough to accept a screwdriver, place a small plywood spacer behind it and screw it to the wall. Find out how to clean a clogged vacuum.

9 / 56

Bungee Cord Organizer

Elastic cords can quickly become a tangled mess. Find the one you need at a glance with this handy rack made from 3- or 4-in. PVC pipe. Just drill 1/2-in.-diameter holes in the pipe to match the slightly stretched lengths of your cords. Keep it in your trunk or shop, out of the reach of children. Check out this other genius bungee cord hack.

10 / 56

Accessorize Your Mower

If you keep a few tools handy while you mow, you can deal with stray weeds as you notice them—no need to hunt for them later. Short sections of PVC pipe taped to the mower's handle will hold tools and other necessities.

11 / 56

Family Handyman

Fast, Inexpensive Table

Aunt Edna just called to tell you she's coming for the holidays (and bringing some nice people she met hanging around the bus station). Trouble is, you don't have enough table space. Don't worry; just run to the home center and get a 10-ft. length of 3-in. PVC pipe, four 3-in. toilet flanges and a hollow-core door. Hollow-core 'slabs' are 80 in. long and available from 28 to 36 in. wide. Cut the PVC to make legs and assemble the table as shown. And then check out our tips for finishing a table top. It's not a masterpiece, but under a tablecloth it looks fine. Plus it's light-weight and easy to disassemble and store until next year. Just remember that hollow-core doors aren't very strong; don't sit or stand on the table.

12 / 56

Cheap Storage Cylinders

Build cheap storage cylinders from PVC pipe, end caps, female adapters and cleanout plugs. Parts are available in an assortment of diameters at any hardware store or home center. Cut the pipe to length with a handsaw or chop saw. Glue an end cap to one end and a female adapter to the other pipe end with PVC cement. Twist in a threaded cleanout plug for a cap. If sealing isn't important, you can drill holes in the pipe to decrease the cylinder's weight. Use the cylinders to store and protect fishing rods, drill bits, cross-country skis, blueprints or anything long and skinny—you name it.

13 / 56

PVC Hammer Holder

Next time you're nailing, do it in style with this sturdy but stylish hammer holder. To make one, use a hacksaw or band saw to cut away one side of a 6-in.-long piece of 2" PVC pipe, leaving 2 in. at the bottom to drop the hammer into. To create belt slots, drill 1/4-in. holes in two lines and clean out the waste between the holes with a rattail file. That's it—drop in the hammer and enjoy its easy-to-reach location. Once you've got all that done, get to work trying out the hammer hacks no one ever thought to tell you.

14 / 56

Get a Grip

Get a better grip on your straight-handled shovel by epoxying a 1-in. PVC tee to the end. Best-Reviewed Snow Shovels on Amazon

15 / 56

Oil Recovery System

If you're environmentally concerned and try to completely drain oil containers when servicing vehicles and lawn equipment, then you'll like this PVC hack. This oil recovery system is made up of 1-in. PVC pipe and assorted 1-in. PVC fittings. Cut 1-in. PVC pipe into 3-in. and 6-in. lengths and glue everything together with PVC cement as shown. Build the oil recovery system as large as needed. Use pipe straps to mount it to the wall, placing it high enough off the floor so a gallon jug with a funnel can slide underneath to catch the last of the oil.

16 / 56

Family Handyman

PVC Sanding Files

Stick sandpaper to cutoff pieces of PVC water pipe with spray-on adhesive and you'll be able to sand concave curves to perfection. PVC pipe is labeled by inside diameter; here's an index for the outside diameter of useful pipe sizes.

1/2-in. i.d. = 7/8-in. o.d.
3/4-in. i.d. = 1-in. o.d.
1-in. i.d. = 1-1/4-in. o.d.
1-1/4-in. i.d. = 1-5/8-in. o.d.
1-1/2-in. i.d. = 1-7/8-in. o.d.

To apply sandpaper to the pipe, spray both the paper and the pipe with a generous layer of adhesive. Let both surfaces dry several minutes before joining them. Use two grits on each pipe—80-grit for sculpting a precise radius, and 100- or 120-grit for finish sanding. When the sandpaper's worn out, just pull it off, spray fresh adhesive on a new strip and go back to having fun.

17 / 56

Family Handyman

Fake Plumbing Pipes

Put in a fake PVC pipe complete with a cleanout plug somewhere in your basement. Unscrew the plug and there are the secret compartment items. Find out the first place burglars look and other secrets they won't tell you.

18 / 56

Family Handyman

PVC Curling Iron Holsters

Hate the messy look of curling irons lying on the vanity or the toilet tank? Here's a tip for you. Use hook-and-loop tape to attach five-inch lengths of 2-in. PVC pipe to the vanity door to hold the curling irons. Do the same thing with three-inch pieces of 1-1/2-in.-dia. pipe to hold the cords. Just measure your curling irons to see how long your "holsters" need to be. Let your curling irons cool before you stow them away.

19 / 56

Overhead Storage in the Garage

Stow bulky items overhead by cementing together a simple rack from 2" PVC pipes and fittings. Bolt the straight pipe to the ceiling joists to support heavy loads, and screw the angled pieces from the 'wye' connectors into the cross brace to stabilize the whole rack. The PVC's smooth surface makes for easy loading and unloading.

20 / 56

Pegboard Cubbyholes

Here's a tool storage technique for all those slender tools and shop accessories. Cut short lengths of PVC pipe (1-1/2-in. and 2-in.-dia. pipes work well for most items) and slide them over pegboard hooks. Then load them up with files, hacksaw blades, zip ties, pencils, stir sticks ... you get the idea.

21 / 56

Family Handyman

Gift Wrap Rack

Here's a terrific way to keep rolls of wrapping paper and ribbon handy, dust-free and unwrinkled. Simply glue a bunch of 30-in.-long pieces of 3-in. PVC waste pipe with all-purpose PVC glue. The rack can sit right on your worktable and you can store it underneath or in a closet. Learn more about working with PVC plastic pipe here.

22 / 56

Caulk Tube Nest

Before I made this caulk nest for my shop, the tubes rolled all over the shelves like slippery logs. To build one, cut 10-in.-long pieces of 2-in. PVC pipe and glue them side to side with PVC cement. To get straight glue lines, use the print along the side of the pipe as a guide. As you glue, hold the pieces together for 60 seconds with hand pressure or a clamp until the glue sets. Be sure to apply the glue only in a well-ventilated area. Glue on one tube at a time to fit the available space. That's it— your caulk tubes are now organized. Expert Guide for Choosing the Right Caulk for Any Job

23 / 56

Family Handyman

Long-Reach Vacuum

A PVC pipe connected to a vacuum hose lets you reach up to high spots or into narrow crannies, so you can suck up those cobwebs around skylights or exterminate dust bunnies behind radiators. A 10-ft. piece of PVC pipe is inexpensive. Here's another vacuum attachment hack. In the plumbing aisle, you'll also find PVC and rubber 'reducer' couplings that let you connect your vacuum hose to a different-size pipe.

24 / 56

Odds-and-Ends Storage

Fill a sturdy cardboard box with sawed-off shipping tubes or scraps of larger PVC pipe. Then use it to store and organize all those short pieces of molding, pipe and dowels. Clever Tool Storage Ideas

Tired of not being able to find where the tape ends on your storage boxes? Learn the easiest way to open a cardboard box.

25 / 56

Quick-Draw Table Saw Accessories

Keep your table saw's miter gauge and push stick within easy reach with a couple of sections of 1-1/2-in. PVC pipe bolted or zip-tied to a convenient spot on the frame under the table. Attach the miter gauge holster using the existing frame bolts, or drill holes in the legs for machine screws. For the push stick holster, we drilled a couple of sets of matching holes about an inch apart on the pipe and tautly zip-tied it to the leg. 5 Must-Have Table Saw Accessories for Your Home Workshop

26 / 56

PVC Dust Catcher

Vacuum dust and chips right at the source! Bolt a 2-in. pot magnet (available at home centers and hardware stores) to a 4-in. x 2-in. PVC pipe reducer and position it near the sander, saw, router or lathe that's making a dust storm in your shop. A 2-in. shop vacuum hose 'press-fits' nicely in the 2-in. reducer end, and the pot magnet ferociously grips any metal surface. If the working surface near the dust source is wood, screw a blank steel electrical box cover to the surface to hold the dust chute on target.

27 / 56

PVC Storage Hangers

It's true—we love PVC pipe. Or let's say we appreciate the way it inspires and accommodates tool and hardware storage. Here's the latest DIY PVC project. Cut 2-in. pieces of 3-in. PVC and saw away a 2-in. section so it looks like Pac Man. (Remember Pac Man?) Drill screw holes and attach the hangers to studs or shop walls. Space pairs for convenient horizontal storage of longer tools such as levels and glue clamps, and use single segments for ropes, electrical cords or anything else that you want securely stored yet easily accessible. Try this tip and you'll learn never to be peeved by leftover PVC. 51 Brilliant Ways to Organize Your Garage

28 / 56

PVC Pipe Clamp Rack

Are your pipe clamps missing in action right when you need them? Never again, thanks to this slick snap-in, snap-out storage rack, made from PVC pipe. For 1/2-in.-diameter iron pipe, use 3/4-in. PVC, and for 3/4-in.-diameter pipe use 1-in. PVC. To make the rack, cut 2-in. lengths of PVC, and with a hacksaw or band saw, slice them lengthwise about 3/16 in. past the diameter's center line. This creates the gripping action to firmly hold the heavy iron pipe. Drill and countersink two holes in each PVC piece, then space and screw them along a pair of 2-in.-wide boards. Attach the upper board to your shop wall and snap a pipe clamp in either end to position the lower board for screwing to the wall.

29 / 56

PVC Tool Pockets

Holster your screwdrivers, chisels, files and other hand tools in 3-in.-long pieces of 1/2- and 3/4-in. PVC pipe. Cut away the upper open section with a hacksaw or band saw, drill a hole, screw the piece on a board, and drop in the tools. If you're using a band saw, slice off the cutaway section from a long length before cutting off the 3-in. holster. 21 Top Tool Storage Tips, Tricks and Ideas

30 / 56

Panpipe Tool Storage

While this tool storage device may look like a variation on the Pan flute of Greek mythology, it's actually a great place to store tools that easily get lost—like chisels, files, pencils, scroll saw blades and hobby knives. For the fatter tools, use PVC cement to join short pieces of 1-1/4-in. PVC pipe side to side into a panpipe design, then add pieces of 1/2-in.pipe along the front of the flute for skinnier tools. Build a simple case around the pipes to create a floor and a back for hanging on a shop wall.

31 / 56

Pipe Clamp Holder

Store bar and pipe clamps right under your workbench where they'll always be close at hand. Just screw sections of 4-in.-diameter PVC pipe under your workbench and slide the clamps into the pipe. Cheap Workshop Storage Solutions You Can DIY

32 / 56

No-Ladder Gutter Cleaner

This gutter cleaner is inexpensive, takes about 10 minutes to make and will help you avoid ladder climbing. Buy 3/4-in. PVC pipe, two elbows, a garden hose coupling and a cap at a local home center. Drill 1/16-in. holes in the cap as shown. Make the handle long enough to comfortably reach your gutters, and cement the parts together with PVC glue. The Best Gutter Guards for Your Home

33 / 56

I-Spy Rain Gutter

Here's a quick and easy way to eyeball rain gutters for possible clogs—before the next downpour causes an overflow. Cut a 60-degree angle on the end of a piece of PVC pipe and tape a hand mirror to the angled end. Hoist the mirror above the gutter to spot leaves and mini jams. Gutters: How to Fix Overflowing Gutters

34 / 56

Photo: Courtesy of PVC Fittings Online

Dog Beds

This durable, easy-to-clean dog bed is suitable for indoor or outdoor puppy lounging. The manufacturer says this bed, “Provides firm, even support no pillow or cushion can match.” Here are 11 awesome DIY cat furniture ideas you can try.

Photo: Courtesy of Kuranda Dog & Cat Beds

35 / 56

Courtesy of Quinnatotor via Reddit

Bike Rack

Use PVC pipe to build a bike rack. Perfect for a corner of the garage, this DIYer used PVC to make a bike rack that holds five bikes upright. Depending on your bike wheel specifications, you can modify dimensions so they all fit snugly. You can also build a wall-mounted bike rack with storage.

Courtesy of Quinnatotor via Reddit

36 / 56

Courtesy Bluepenguine12/reddit

Fish House

This DIYer used a cut piece of PVC pipe to add to the fish tank. If your fish tank is large enough, try connecting some PVC pipe to make tunnels and “homes” for your fish. Try using an old coffee pot as a dual-purpose fish tank and planter.

Courtesy of bluepenguine12 via Reddit

37 / 56

PreechaB/Shutterstock

Hide Cords

Help keep your home office space organized by using PVC pipe to hide cords. Just wrangle all those computer, mouse, monitor and phone cords and hide them in some PVC pipe. You can even use some colorful tape to match your office décor. Try these 10 easy DIYs for a home office.

38 / 56

Photo: Courtesy of The Tinker Shop/Etsy

Bat and Ball Holder

For PVC pipe ideas, this is a home run. With the downloadable plan from The Tinker Shop, and about $15 in materials, you can make this nifty PVC bat and ball holder. Check out more sports equipment storage hacks here.

Photo: Courtesy of The Tinker Shop/Etsy

39 / 56

Photo: Courtesy of TowelMaid/Etsy

Towel Drying Rack

Need a place to dry all of those wet towels, swimming suits and life jackets? This sturdy PVC rack has room for everything and you can place it where you need it—alongside the backyard pool or near your cabin or summer home. Hang clean dry towels on the rack and when everyone jumps out of the pool, all they have to do is grab one!

Photo: Courtesy of TowelMaid/Etsy

40 / 56

Table Saw Fence Sheath

It’s a lot easier to crosscut boards on a table saw or use the surface as a workbench without the fence in the way. But where do you put it? How about tucking it away in a piece of PVC pipe bolted to the saw base? Buy and install a length of 4- or 5-in.-diameter PVC (measure your fence first!). Rip the leftover pipe in half and screw it to the top of the sheath. It’s a great shelf for push sticks, wrenches, featherboards and other accessories. Thanks to Martin Kipp for inspiring this tip to add to our list of PVC pipe ideas! Check out some other savvy storage tips around the house and the garage.

41 / 56

PVC Stain Tube

A common frustration for DIYers is dealing with the irregular shapes of furniture legs and spindles. Avoid the headaches of sanding or staining intricate shapes by using PVC pipe as a dip tube. Just be sure to glue a cap to the bottom end of the tube to avoid leaks! Want to know more about refinishing furniture? Learn all the secrets from a seasoned pro.

42 / 56

Photo: Courtesy of Kilted Craftworks

Honey Spinner

This DIYer came up with a clever way to harvest honey from his hives. He created a drill-powered honey spinner with PVC pipe. Learn about the setup here.

Photo: Courtesy of Kilted Craftworks

43 / 56

Photo: Courtesy of Serenity Secret Garden

PVC Tower

Try using some PVC pipe to build a flower tower. This planter is used for growing strawberries, but you can also use the holes to plant some flowers to brighten up your backyard. You can see instructions for the project here.

Photo: Courtesy of Urban Green Space

44 / 56

PVC Drying Rack

This PVC mitten/glove dryer utilizes the heat from the floor vent. The racks are made from a 6-inch piece of PVC, a wire hanger, some electrical tape and glue. For the full instructions, visit revrider.net.

Photo: Courtesy of Rev Rider

45 / 56

Family Handyman

Drawer Organizers on the Cheap

Slit some up PVC pipe down the middle and you’ve got stackable drawer organizers to keep all your small tools handy. See why a pool noodle inside a kitchen drawer isn’t such a crazy idea.

46 / 56

Family Handyman

Light Shroud Made of PVC

My neighbor had a new septic system installed last year. The lift pump inside the tank has a brilliant red light on the top that lets him know the unit is working. But it was so bright that it was like having a harbor navigation buoy in the yard—it drove me crazy! So I got his permission to build a shroud from 3-in. plastic pipe. I cut out a little slot in the shroud, slipped on a cap and caulked it down over the light. Now he can see the beacon from his kitchen window, but the light doesn’t bother me. — Pete Simpson. Pretty good neighbors but here’s what happens when neighbors don’t get along.

47 / 56

Family Handyman

Grease Gun Holster

A grease gun is big and, uh, greasy. So don’t slime up your drawers or cabinets with it. Slice up a few sections of 1-in. and 3-in. PVC pipe and screw them to a plywood backer to make this slick grease gun holder. Then slap up a 2-in. coupler and cap to hold a backup tube of grease.

48 / 56

Family Handyman

Central Vacuum for the Garage

Install 2-in. sanitary tees on the ceiling and drop a pipe near each car door. Install a long 90-degree bend and a stubout to connect the hose. Cap off the stubout with a standard 2-in. pipe cap when not in use. Check out the complete plans to upgrading your garage here.

49 / 56

Family Handyman

5-Gallon Bucket PVC Pipe Cutter

Here’s a nifty way to cut PVC pipe on the fly. Just make a couple of notches in the top of a 5-gallon bucket. Set the pipe in the notches and you’ve got a stable spot for sawing. As a bonus, you can load up the bucket and carry your tools along, too! Five-gallon buckets are the ultimate utility tool to have around, check out some other ingenious uses, including one you’re dog will love.

50 / 56

Family Handyman

PVC Pipe Blade and Bit Organizer

I always seem to have extra bits, jigsaw blades and other small items lying loose in my toolboxes and bags. To keep things organized, I cut different diameters of PVC pipe to the lengths needed for my accessories. I glue one end cap in place, put my items inside and slide on the other end cap. Use a marker to label each container and you’ll be able to find all your bits, blades, screws and whatever when you need them. — Tom Richardson. Have a religious experience in your garage with these 27 life-changing tips for your garage.

51 / 56

Family Handyman

PVC Plastic Bag Dispenser

After building a PVC fence, I was left with a few extra 2-ft. lengths of fence post. I turned one of them into a home for grocery bags that I reuse. I stuff them into the top and pull them out the bottom. If you don’t have any leftover fencing, 3-in.-diameter PVC pipe works well too. Attach it to the door inside a pantry or closet, or to a wall of your workshop or garage. — Dave Mitchell. Get those bags out of the way in the kitchen too, and organize your kitchen.

52 / 56

Family Handyman

Perfect-Fit PVC

When assembling PVC pipes, you should cut and “dry-fit” everything before cementing the components. If you don’t and the pipe fittings aren’t oriented perfectly during reassembly, the contraption won’t fit and you won’t be able to get the fittings apart to make adjustments. Next time, number and make alignment marks on the pieces so you can join them in exactly their correct positions.

53 / 56

Family Handyman

Sprinkler Socket System

If you use spike-type sprinklers, try setting them into permanent sockets made from 1-in. PVC pipe. Not only will these sockets make moving the sprinklers a snap, but they’ll keep the sprinklers upright and shooting water where you want it. Water you lawn efficiently and save some big bucks with these tips.

54 / 56

Family Handyman

Fastener Trough

Cut a 2-ft. length of 4-in. PVC pipe lengthwise with a scroll saw, creating a trough that’s a little more than half the pipe’s diameter. Glue or screw in 1/2-in. thick wood partitions to create compartments for often-used screw and nail sizes. To make it tip-proof, trace the pipe’s curve on a couple of scrap 2×4 blocks, power-sand or saw out the curve, and screw the pipe on this scrap block base.

55 / 56

Family Handyman

Dowel Quiver

Use a saber saw to cut lengthwise notches in a 30-in. long piece of 3- or 4-in. dia. pipe then glue on a PVC end cap. Drill pilot holes in the pipe opposite the notches and screw the quiver to a shop wall. Your notched-out quiver will hold any size dowel— from standard 36-in. lengths to stubby leftovers—for instant access. Thanks to George Marchalk for sending this tip down the pipeline.

56 / 56

Family Handyman

PVC Spring Clamps

If you’re ever in a pinch for spring clamps, reader John Larson advises making them yourself from short sections of PVC pipe. Use 1-1/2 to 3-inch diameter pipe, cut into 1-1/2-inch wide sections; slit the sections across the width. They’ll give 8 to 10 pounds of clamping pressure for all kinds of gluing and holding tasks.