Use This Simple Hack to Save Your Phone Charger
To make your otherwise fragile phone charger last for more than a couple of weeks, try out this simple hack! Start by removing the spring from a pen. Next, stretch one end of the spring out a bit so it can fit around the charger cable. You might need to use pliers for this. Now, wind the spring around the cable until it is completely on the charger cable. Next, take appropriately sized heat shrink tubing and slip it over the phone charger and spring. Use a lighter to warm the heat shrink tubing until it conforms around the charger and spring. This simple hack will keep the cord from breaking any further or from even breaking in the first place!
Plus, learn how to install a super easy USB outlet, it’s easy enough for a first-time electrician!